4JPE9
Turbine Pump, 2 HP, 3 Ph, 5.8/2.9 Amp
Bronze-fitted Turbine Pump
Turbine Pump, Bronze-Fitted, 1 HP, 1 Phase, Voltage 115/230, Inlet 1 1/4 In., Outlet 1 In., Max. Pressure 300 PSI, Length 16 1/4 In., Height 8 1/16 In., Width 6 3/4 In.
Артикул:
4P916
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4P916
Страна производства:
USA
Вес (кг):
19.77
Спецификация:
| Item: Turbine Pump |
| Type: Bronze-Fitted |
| HP: 1 |
| Phase: 1 |
| Voltage: 115/230 |
| Inlet (In.): 1-1/4 |
| Outlet (In.): 1 |
| Motor Enclosure: ODP |
| NEMA/IEC Frame: 56C |
| Motor Type: Cap-Start, ODP |
| Wetted Materials: Cast Iron, Bronze Fitted |
| Impeller Material: Bronze |
| Housing Material: Cast Iron |
| Volute Material: Cast-Iron, Bronze Fitted |
| Screw Material: Steel |
| Seal Type: Type 21 |
| Seal Material: Carbon, Ceramic, Buna |
| Seal Application: Low Flow, High Head |
| Max. Liquid Temp. (F): -20 to 230 |
| GPM @ 10 PSI: 11.1 |
| GPM @ 20 PSI: 10.8 |
| GPM @ 30 PSI: 10.6 |
| GPM @ 50 PSI: 10.2 |
| GPM @ 60 PSI: 10 |
| GPM @ 75 PSI: 9.4 |
| GPM @ 100 PSI: 9.0 |
| Max. Pressure (PSI): 300 |
| Best Efficiency GPM @ Head (Ft.): 8.4 GPM @ 130 PSI |
| Best Efficiency Range GPM @ Head (Ft.): 7.0-10.0 GPM @ 190-60 PSI |
| Max. Specific Gravity: 1.00 SP |
| Max. Case Pressure (PSI): 300 |
| Max. Fluid Viscosity: 250 SSU |
| Inlet Pressure (PSI): 200 |
| Impeller Type: Regenerative Turbine |
| Bearing Type: Sealed Ball Bearing (Motor Bearing) |
| Duty: Continuous |
| Max. Dia. Solids (In.): 25 Microns |
| Port Rotation: 90 Increments |
| Drain Plug: 180 From Inlet Port |
| Agency Compliance: UL and CSA on Motor Only |
| Application: For Boiler Feed and Condensate Return Service, Low Flow, Pumping Clean Fluids, Nonflammable Liquids Compatible with Pump Component Materials |
| Length (In.): 16-1/4 |
| Height (In.): 8-1/16 |
| Width (In.): 6-3/4 |
| Construction: Bronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve |
| Includes: Cast Casing with Bronze Impeller |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 2WV86 Grainger |
 |
Shaft Seal, Regenerative, Includes Seal and Seat | DAYTON 2WV86 |
|
| 2WV90 Grainger |
 |
Shaft Seal Kit, Regenerative, Includes Seal, Seat, and Pump O-Rings | DAYTON 2WV90 |
|
| 6P822 Grainger |
 |
Nipple, Pipe Size 1 In, Length 2 In, NPT Connection, Material of Construction Galvanized Welded Steel, Schedule 40, Standards WWN 351, ASTM A-733, ASTM-A-53 Type E Or F, Compliance Certified For Use In Potable Water Applications | GRAINGER APPROVED VENDOR 6P822 |
|
