4JPF4
Turbine Pump, 1/2 HP, 3 Ph, 1.7/0.9 Amp
Turbine Pump, 1 1/2 HP, 1 Ph, 13.5/6.7 Amp
Turbine Pump, Close Coupled, 1 1/2 HP, 1 Phase, Voltage 115/208-230, 13.5/7.6-6.7 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 130 PSI, Length 15 In., Height 8.26 In., Width 8.8 In.
Артикул:
4JPE6
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPE6
Страна производства:
India
Вес (кг):
25.00
Спецификация:
| Item: Turbine pump |
| Type: Centrifugal |
| HP: 1-1/2 |
| Phase: 1 |
| Voltage: 115/208-230 |
| Amps: 13.5/7.6-6.7 |
| Hz: 60 |
| Inlet (In.): 1 |
| Outlet (In.): 1 |
| Motor Enclosure: TEFC |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Motor Type: Capacitor-Start, Capacitor-Run |
| Service Factor: 1.15 |
| Wetted Materials: Bronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel |
| Impeller Material: Bronze |
| Housing Material: Bronze |
| Volute Material: Bronze |
| Shaft Material: 304 Stainless Steel |
| Shaft Size (In.): 5/8" |
| Screw Material: SS |
| Seal Type: Mechanical Seal |
| Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
| Seal Application: Long Life When Not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): -20 to 230 Degrees F |
| GPM @ 10 PSI: 7.8 |
| GPM @ 20 PSI: 7.6 |
| GPM @ 30 PSI: 7.1 |
| GPM @ 40 PSI: 6.7 |
| GPM @ 50 PSI: 6.3 |
| GPM @ 60 PSI: 5.8 |
| GPM @ 75 PSI: 5.1 |
| GPM @ 80 PSI: 4.8 |
| GPM @ 100 PSI: 3.6 |
| GPM of Water @ 120 PSI: 2.3 |
| Max. Pressure (PSI): 130 |
| Best Efficiency GPM @ Head (Ft.): 5.3 @ 70 |
| Best Efficiency Range GPM @ Head (Ft.): 40 - 100 @ 6.7 - 3.6 |
| Max. Specific Gravity: 1 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 70 |
| Impeller Type: Open |
| Bearing Type: Ball |
| Duty: Continuous |
| Drain Plug: Easily Accessible at Bottom |
| Agency Compliance: Motor is UL Recognized |
| Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials. |
| Length (In.): 15 |
| Height (In.): 8.26 |
| Width (In.): 8.8 |
| Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
| Includes: OIPM |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 3ACE5 Grainger |
 |
Replacement Pump Shaft Seal, Shaft Size 7/8 In, Seal Bore 7/8 In, Nominal Working Length (In) 1 15/64, Seat Bore 1 1/2 In, Seat Thickness 0.405, Material Content Code VCRJR, Seal Material Viton, Carbon, Ceramic, Max Temp 200 F, Min Temp Rating 40 Deg F | DAYTON 3ACE5 |
|
| 3ACF8 Grainger |
 |
Replacement Pump Shaft Seal, Shaft Size 7/8 In, Seal Bore 7/8 In, Nominal Working Length (In) 1 15/64, Seat Bore 1 1/2 In, Seat Thickness 0.405, Material Content Code BCRJR, Seal Material Buna, Carbon, Ceramic, Max Temp 160 F, Min Temp Rating -25 Deg F | DAYTON 3ACF8 |
|
