4JPF7 4JPF7
DAYTON
Turbine Pump, 1 HP, 3 Ph, 3.2/1.6 Amp
Turbine Pump, Close Coupled, 1 HP, 3 Phase, Voltage 208-230/460, 3.7-3.2/1.6 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 168 PSI, Length 15 3/8 In., Height 7 3/4 In., Width 6 11/16 In.
Артикул:
4JPE3
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPE3
Страна производства:
India
Вес (кг):
22.77
Спецификация:
| Item: Turbine pump |
| Type: Centrifugal |
| HP: 1 |
| Phase: 3 |
| Voltage: 208-230/460 |
| Amps: 3.7-3.2/1.6 |
| Hz: 60 |
| Inlet (In.): 1 |
| Outlet (In.): 1 |
| Motor Enclosure: ODP |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Motor Type: 3 Phase |
| Service Factor: 1.4 |
| Wetted Materials: Bronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel |
| Impeller Material: Bronze |
| Housing Material: Bronze |
| Volute Material: Bronze |
| Shaft Material: 304 Stainless Steel |
| Shaft Size (In.): 5/8" |
| Screw Material: SS |
| Seal Type: Mechanical Seal |
| Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
| Seal Application: Long Life When Not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): -20 to 230 Degrees F |
| GPM @ 10 PSI: 11.5 |
| GPM @ 20 PSI: 11.1 |
| GPM @ 30 PSI: 10.6 |
| GPM @ 40 PSI: 10 |
| GPM @ 50 PSI: 9.4 |
| GPM @ 60 PSI: 8.9 |
| GPM @ 75 PSI: 8.3 |
| GPM @ 80 PSI: 8 |
| GPM @ 100 PSI: 7 |
| Max. Pressure (PSI): 120 |
| Best Efficiency GPM @ Head (Ft.): 9.4 @ 50 |
| Best Efficiency Range GPM @ Head (Ft.): 25 - 65 @ 10.9 - 8.7 |
| Max. Specific Gravity: 1 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 132 |
| Impeller Type: Open |
| Bearing Type: Ball |
| Duty: Continuous |
| Drain Plug: Easily Accessible at Bottom |
| Agency Compliance: Motor is UL Recognized |
| Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials. |
| Length (In.): 15.35 |
| Height (In.): 7.6 |
| Width (In.): 6.7 |
| Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
| Includes: OIPM |
Альтернативная продукция:
Turbine Pump, Close Coupled, 1 HP, 3 Phase, Voltage 208-230/460, 3.7-3.2/1.6 Amps, 60 Hz, Inlet 1 1/4 In., Outlet 1 In., Max. Pressure 168 PSI, Length 15 3/8 In., Height 7 3/4 In., Width 6 11/16 In.