4JPE6
Turbine Pump, 1 1/2 HP, 1 Ph, 13.5/6.7 Amp
Turbine Pump, 1 1/2 HP, 3 Ph, 4.6/2.3 Amp
Turbine Pump, Close Coupled, 1 1/2 HP, 3 Phase, Voltage 208-230/460, 4.6/4.5-2.3 Amps, 60 Hz, Inlet 1 1/4 In., Outlet 1 In., Max. Pressure 230 PSI, Length 14 3/8 In., Height 7 1/8 In., Width 8 13/16 In.
Артикул:
4JPF9
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPF9
Страна производства:
India
Вес (кг):
24.09
Спецификация:
Item: Turbine pump |
Type: Centrifugal |
HP: 1-1/2 |
Phase: 3 |
Voltage: 208-230/460 |
Amps: 4.6/4.5-2.3 |
Hz: 60 |
Inlet (In.): 1-1/4 |
Outlet (In.): 1 |
Motor Enclosure: TEFC |
NEMA/IEC Frame: 56J |
Motor RPM: 3450 |
Motor Type: 3 Phase |
Service Factor: 1.15 |
Wetted Materials: Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel |
Impeller Material: Bronze |
Housing Material: Cast Iron with nickel plating |
Volute Material: Cast Iron with Nickel Plating |
Shaft Material: 304 Stainless Steel |
Shaft Size (In.): 5/8" |
Screw Material: Zinc Plated |
Seal Type: Mechanical Seal |
Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
Seal Application: Long Life When Not Run Dry or Pumping Abrasives |
Max. Liquid Temp. (F): -20 to 230 Degrees F |
GPM @ 10 PSI: 9.7 |
GPM @ 20 PSI: 9.2 |
GPM @ 30 PSI: 8.8 |
GPM @ 40 PSI: 8.3 |
GPM @ 50 PSI: 7.8 |
GPM @ 60 PSI: 7.4 |
GPM @ 75 PSI: 6.8 |
GPM @ 80 PSI: 6.5 |
GPM @ 100 PSI: 5.6 |
GPM of Water @ 120 PSI: 4.7 |
Max. Pressure (PSI): 140 |
Best Efficiency GPM @ Head (Ft.): 7.0 @ 70 |
Best Efficiency Range GPM @ Head (Ft.): 40 - 100 @ 8.3 - 5.6 |
Max. Specific Gravity: 1 |
Max. Case Pressure (PSI): 200 |
Max. Fluid Viscosity: 100 SSU |
Inlet Pressure (PSI): 170 |
Impeller Type: Open |
Bearing Type: Ball |
Duty: Continuous |
Drain Plug: Easily Accessible at Bottom |
Agency Compliance: Motor is UL Recognized |
Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials. |
Length (In.): 14.4 |
Height (In.): 7.1 |
Width (In.): 8.8 |
Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
Includes: OIPM |