Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
1XC92
Grainger |
 |
Variable DC Speed Control, Output Voltage 90/180 VDC, Power Rating @ Lower Voltage 1/50 to 1/2, @ Higher Voltage 1/25 to 1 HP, Input Voltage 120/240 VAC 60/50 Hz, Speed Range 100:1, Field Programmable Front Panel, Microprocessor Based with Nonvolatile Memory, Digital Closed Loop Accuracy with Pulse Generator +/- 1/2 RPM, Digital Display 1/2 Inch LED, Mount 1/8 DIN, Height 1.66 Inches, Depth 4.13 Inches, Width 3.62 Inches |
DART CONTROLS
MD10P |
2LHT4
Grainger |
 |
Variable DC Speed Control, Analog, Shunt Wound Volts 100/200 VDC, 1/8 to 1/2 HP @ 90 VDC, 1/4 to 1 HP @ 180 VDC, Voltage Output 90/180 VDC, Voltage Input 120/240 VAC, Chassis Enclosure, Speed Range 50:1, Speed Regulation 1%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 5.0, Dynamic Braking Capability, Linear Acceleration Adjustable 0.5 to 8 Sec, Linear Deceleration Adjustable 0.5 to 8 Sec, Adjustable IR Compensation, Mount Type Chassis, 4.25 In. H x 1.30 In. D x 3.63 In. W |
DART CONTROLS
125DV-C-2A |
2LHT5
Grainger |
|
Variable DC Speed Control, Analog, Electronic, Shunt Wound Volts 100/200 VDC, 1/8 to 1/2 HP @ 90 VDC, 1/4 to 1 HP @ 180 VDC, Voltage Output 90/180 VDC, Voltage Input 120/240 VAC, Chassis Enclosure, Speed Range 50:1, Speed Regulation 1%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 5.0, Dynamic Braking Capability, Linear Acceleration Fixed, Linear Deceleration Fixed, Adjustable IR Compensation, Mount Type Chassis, Height 4.25 In, Depth 1.30 In, Width 3.63 In |
DART CONTROLS
125DV-C-1 |
2LHT6
Grainger |
 |
DC Speed Control, Reversing, Shunt Wound Volts 100/200 VDC, 1/8 to 1 HP @ 90 VDC, 1/4 to 2 HP @ 180 VDC, Voltage Output 90/180 VDC, Voltage Input 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation 1%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 10.0, Linear Acceleration Adjustable 0.5 to 8 Sec, Linear Deceleration Fixed, Adjustable IR Compensation, Height 7.25 In, Depth 2.75 In, Width 5.53 In |
DART CONTROLS
253G-200E-29 |
2LHT7
Grainger |
 |
Potentiometer, 5K Ohm, Provides Speed Setting for Any DC Drive, Includes Speed Pot, Knob, Dial Plate and 8 3/4 In Leads, Rated .5 Watts |
DART CONTROLS
SA-STOK-WO |
2LHT8
Grainger |
 |
DC Speed Control, 1-1/2 HP, Voltage Output 0 to 24/36VDC, Input Voltage 24/36VDC, Speed Range 30:1, Speed Regulation 1 Percent of Base, Current/Torque Limit Adjustable 100 to 200 Percent of Full Motor Load, Up to Continuous Current Rating, Accepts Tach Feedback No, Max. Amps 40.0, Linear Acceleration Adjustable 0 to 10 Sec, Linear Deceleration Fixed 0.5 Sec., Protection Type Fuse (Not Included), IR Compensation Adj., Mount Type Chassis, Includes Speed Potentiometer, Knob and Dial Plate |
DART CONTROLS
65E40 |
2LHT9
Grainger |
|
DC Speed Control, Low Voltage Pulse Width-Modulated, 1/2 HP @ 12 VDC, Voltage Output 12 VDC, Voltage Input 12 VDC, Speed Range 30:1, Speed Regulation 1% of Base, Current/Torque Limit Adjustable 100 to 200% of Full Motor Load, Up to Continuous Current Rating, Max Amps 40.0, Linear Acceleration Adjustable 0 to 10 Sec, Linear Deceleration Fixed 0.5 Sec, Adjustable IR Compensation, Mount Type Chassis, Height 7.00 In, Depth 1.70 In, Width 3.70 In, Includes Speed Potentiometer, Knob and Dial Plate |
DART CONTROLS
65E40-12 |
2LHU1
Grainger |
 |
Potentiometer, Digital, Voltage Output 0 to 24 VDC, Voltage Input 120/240 VAC, NEMA 4X Enclosure, Linear Acceleration Adjustable 0 to 30 Sec, Linear Deceleration Adjustable 0 to 30 Sec, Display Type LED, Mount Type Panel, 1/8 DIN Style, Height 1.66 In, Depth 4.63 In, Width 3.63 In, Includes Gasket Kit for NEMA 4 Panel Installation |
DART CONTROLS
DP4 |
2LHU2
Grainger |
 |
Shunt Wound Volts -, 1 @ 90VDC, 2 @ 180VDC HP, Voltage Output 90/180VDC, Input Voltage 120/240VAC, NEMA 4X Enclosure, Speed Range -, Speed Regulation +/-1 RPM of Set Speed, Current/Torque Limit -, Accepts Tach Feedback Yes, Max. Amps 10, Dynamic Braking -, Linear Acceleration Adjustable 0 to 30 Sec., Linear Deceleration Adjustable 0 to 30 Sec., Fixed Deceleration (Sec.) 0 to 30, Rotation -, Power On Light -, Display Type LED, Protection Type Fused, IR Compensation Closed-Loop |
DART CONTROLS
MD3E |
2LHU3
Grainger |
 |
Variable DC Speed Control, Closed-Loop, 1/8 to 1 HP @ 120 VAC, 1/4 to 2 HP @ 240 VAC, Voltage Output 90/180 VDC, Voltage Input 120/240 VAC, Speed Regulation +/- 1/2 RPM of Set Speed, Accepts Tach Feedback, Max Amps 10.0 DC, Linear Acceleration Adjustable 0 to 30 Sec, Linear Deceleration Adjustable 0 to 30 Sec, Display Type LED, Protection Type Fuse (Not Included), Closed-Loop IR Compensation, Follower Circuit, Panel Mount Type, Height 3.50 In, Depth 4.63 In, Width 3.62 In |
DART CONTROLS
MD3P |
