2LHU2
Speed Control, 90/180 VDC Output, 10.0 A
DC Speed Control, 90/180 VDC Output, 10 A
Variable DC Speed Control, Closed-Loop, 1/8 to 1 HP @ 120 VAC, 1/4 to 2 HP @ 240 VAC, Voltage Output 90/180 VDC, Voltage Input 120/240 VAC, Speed Regulation +/- 1/2 RPM of Set Speed, Accepts Tach Feedback, Max Amps 10.0 DC, Linear Acceleration Adjustable 0 to 30 Sec, Linear Deceleration Adjustable 0 to 30 Sec, Display Type LED, Protection Type Fuse (Not Included), Closed-Loop IR Compensation, Follower Circuit, Panel Mount Type, Height 3.50 In, Depth 4.63 In, Width 3.62 In
Артикул:
2LHU3
Каталог:
Grainger
Производитель:
DART CONTROLS
Номер модели:
MD3P
Страна производства:
USA
Вес (кг):
1.02
Спецификация:
| Item: Variable DC Speed Control |
| Type: Closed-Loop |
| HP: 1/8 to 1 HP @ 90VDC, 1/4 to 2 HP @ 180VDC |
| Voltage Output: 90/180VDC |
| Input Voltage: 120/240VAC |
| Speed Regulation: +/-1/2 RPM of Set Speed |
| Accepts Tach Feedback: Yes |
| Max. Amps: 10.0 DC |
| Linear Acceleration: Adjustable 0 to 30 Sec. |
| Linear Deceleration: Adjustable 0 to 30 Sec. |
| Acceleration Adjust (Sec.): 0 to 30 |
| Power On Light: No |
| Display Type: LED |
| Protection Type: Fuse (Not Included) |
| IR Compensation: Closed-Loop |
| Follower Circuit: Yes |
| Mount Type: 1/4 DIN |
| Height (In.): 3.5 |
| Depth (In.): 4.63 |
| Width (In.): 3.62 |
| Operates On: 50/60 Hz |
| Provides: Adjustable Closed-Loop Motor Speed Control with Digital Display |
| Operating Temp.: -10 to 45 Degree C |
| HP @ Higher Volts: 1/4 to 2 |
| HP @ Lower Volts: 1/8 to 1 |
| For Use With: Conveyor Ovens Used in Food Preparation, UV Curing, Heat Shrink Packaging, Industrial Auger and Mixing Equipment, Medical Lab Mixing Equipment, Spray Equipment, Printing Processes, Pumping Systems and Anywhere Accuracy and Closed Loop are Needed with a DC Motor |
| Includes: Digital Display, NPN Open-Collector Transistor to Accept Tach Feedback |
| Agency Compliance: cULus Recognized (E78180) |
| Необходимая продукция: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 5JJ65 Grainger |
 |
Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing | DART CONTROLS PU-20E |
|
