ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 71 RPM, 90vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 71, Full Load Torque (In.-Lbs.) 40.0, Overhung Load (Lb.) 90, Input HP 1/20, Gear Ratio 25:1, Full Load Amps 0.62TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY3

Артикул:

6Z915

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

6Z915

Страна производства:

USA

Вес (кг):

3.02

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 90VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 71

Full Load Torque (In.-Lbs.): 40.0

Overhung Load (Lb.): 90

Input HP: 1/20

Gear Ratio: 25:1

Full Load Amps: 0.62

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 7-1/2

Shaft Dimensions (In.): 1/2 x 1

Bearings: Needle on Case Output Shaft, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: 1st Stage Steel, Helical, Subsequent Stages Steel or Heat Treated Powdered Metal Spur

Seals: Spring Loaded Lip Type on Input and Output Shaft

Replacement Brushes: 6YHY3

RPM Range: 51 to 75

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
4Z527 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25	DAYTON 4Z527
4Z827 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, Chassis Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 4.00, Depth (In.) 2.00, Width (In.) 4.90	DAYTON 4Z827
5JJ56 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.30 Inches, Depth 3.30 Inches, Width 2.80 Inches	DART CONTROLS 15DV1A
5JJ57 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.50 Inches, Depth 3.30 Inches, Width 2.80 Inches	DART CONTROLS 15DV2A
5JJ58 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/3 HP, @ Higher Voltage 1/25-2/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 3.0 Amps, Enclosure NEMA 4/12, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, On/Off Switch, Fuse Protected, Length 5.50 Inches, Depth 3.50 Inches, Width 3.81 Inches	DART CONTROLS 15DVE

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
2A754 Grainger	Mounting Bracket, For Permanent Magnet DC Parallel Shaft Gearmotor, Bolts to Face of Gearmotor, Mount to Floor, Wall or Ceiling, Use on 1L517 thru 1L532, 2H561, 2H563, 2H565, 2H567, 2H569, 2H596, 2H598, 2H600, 2H602, 2H604, 6A195 thru 6A198, 6Z073 thru 6Z084, 6Z910 thru 6Z916, Includes 4 Screws	DAYTON 2A754
2PUX3 Grainger	DC Speed Control, 1/35-1/6 HP, Voltage Output 90, Voltage Input 115, IP30 Enclosure, Speed Range 15:01, Speed Regulation 10-30%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 4A, Display Type None, Protection Type None, IR Compensation None, Follower Circuit None, Mount Type Motor Endbell, SCR PMDC Speed Control Style, Height 3.6 In, Depth 3.19 In, Width 2.61 In	DAYTON 2PUX3
5JJ65 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-20E
6YHY3 Grainger	Replacement Motor Brush Set, DC, Length 1/4 In., Width 1/4 In., Includes 2 Brushes And 2 Springs	DAYTON 6YHY3
6Z392 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-2E

Альтернативная продукция:

2H563 - Gearmotor, 71 RPM, 90vdc Подробнее...

2H563 2H563
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC Phase, Nameplate RPM 71, Full Load Torque (In.-Lbs.) 83.0, Overhung Load (Lb.) 230, Input HP 1/10, Gear Ratio 25:1, Full Load Amps 1.08, TENV Enclosure, None Thermal Protection, All Position Mounting, Replacement Brushes 6YHY6

4Z382 - Gearmotor, 64 RPM, 90vdc Подробнее...

4Z382 4Z382
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 64, Full Load Torque (In.-Lbs.) 113.0, Overhung Load (Lb.) 150, Input HP 1/8, Gear Ratio 28:1, Full Load Amps 1.41TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6