4Z527 4Z527
DAYTON
Control, DC Speed
Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, Chassis Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 4.00, Depth (In.) 2.00, Width (In.) 4.90
Артикул:
4Z827
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4Z827
Страна производства:
USA
Вес (кг):
0.44
Спецификация:
| Item: DC Speed Control |
| Shunt Wound Volts: 100/200 |
| HP: 1/50 - 1/3 |
| Voltage Output: 90/180 VDC |
| Input Voltage: 120/240 |
| Enclosure: Chassis |
| Speed Range: 25:1 |
| Speed Regulation: +/- 1% of Base Speed |
| Current/Torque Limit: None |
| Accepts Tach Feedback: No |
| Max. Amps: 2 Amps Continuous |
| Dynamic Braking: No |
| Linear Acceleration: Fixed 0.5 sec. |
| Linear Deceleration: No |
| Acceleration Adjust (Sec.): Fixed Acceleration (0.5 seconds) |
| Power On Light: No |
| Protection Type: Customer supplied fuse |
| IR Compensation: Adjustable - full range |
| Height (In.): 4.00 |
| Depth (In.): 2.00 |
| Width (In.): 4.90 |
| Operating Temp.: -10 to 40 degrees C Ambient, (15 to 105 F) |
| External Switches: On/Off |
| HP @ Higher Volts: 1/25 to 1/3 |
| HP @ Lower Volts: 1/50 to 1/6 |
| For Use With: 90/180 VDC Motors |
| Includes: Run/Stop Switch, Adj IR Compensation, Built-in Transient and Surge Suppression |
| Agency Compliance: cULus Listed |
Альтернативная продукция:
Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25
Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/3 HP, @ Higher Voltage 1/25-2/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 3.0 Amps, Enclosure NEMA 4/12, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, On/Off Switch, Fuse Protected, Length 5.50 Inches, Depth 3.50 Inches, Width 3.81 Inches