ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 8.7rpm, 90vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC Phase, Nameplate RPM 8.7, Full Load Torque (In.-Lbs.) 250.0, Overhung Load (Lb.) 150, Input HP 1/20, Gear Ratio 208:1, Full Load Amps 0.53, TENV Enclosure, None Thermal Protection, All Position Mounting, Replacement Brushes 6YHY3

Артикул:

6A194

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

6A194

Страна производства:

USA

Вес (кг):

4.75

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 90VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 8.7

Full Load Torque (In.-Lbs.): 250.0

Overhung Load (Lb.): 150

Input HP: 1/20

Gear Ratio: 208:1

Full Load Amps: 0.53

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 8-1/4

Shaft Dimensions (In.): 5/8 x 1 1/2

Bearings: Needle Roller and Thrust Balls on Case, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel, 1st Stage Helical, Subsequent Stages Spur

Seals: Spring Loaded Lip Type on Input and Output Shaft

Replacement Brushes: 6YHY3

RPM Range: 0 to 15

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
4Z527 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25	DAYTON 4Z527
4Z827 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, Chassis Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 4.00, Depth (In.) 2.00, Width (In.) 4.90	DAYTON 4Z827
5JJ56 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.30 Inches, Depth 3.30 Inches, Width 2.80 Inches	DART CONTROLS 15DV1A
5X412 Grainger	Variable DC Speed Control, Output Voltage 90 VDC, Power Rating 1/50 - 1/6 HP, Enclosure NEMA 1, Input Voltage 120 VAC, Speed Range 25:1, Percent of Speed Regulation to Nameplate RPM +/-1%, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 6 Inches, Depth 4 5/16 Inches, Width 4 Inches	DAYTON 5X412
6X165 Grainger	Shunt Wound Volts 100 or 200, 1/50 to 1/4 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 6X165

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
2PUX3 Grainger	DC Speed Control, 1/35-1/6 HP, Voltage Output 90, Voltage Input 115, IP30 Enclosure, Speed Range 15:01, Speed Regulation 10-30%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 4A, Display Type None, Protection Type None, IR Compensation None, Follower Circuit None, Mount Type Motor Endbell, SCR PMDC Speed Control Style, Height 3.6 In, Depth 3.19 In, Width 2.61 In	DAYTON 2PUX3
5JJ65 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-20E
6YHY3 Grainger	Replacement Motor Brush Set, DC, Length 1/4 In., Width 1/4 In., Includes 2 Brushes And 2 Springs	DAYTON 6YHY3
6Z392 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-2E

Альтернативная продукция:

6A193 - Gearmotor, 5.4rpm, 90vdc Подробнее...

6A193 6A193
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC Phase, Nameplate RPM 5.4, Full Load Torque (In.-Lbs.) 227.0, Overhung Load (Lb.) 150, Input HP 1/20, Gear Ratio 336:1, Full Load Amps 0.40, TENV Enclosure, None Thermal Protection, All Position Mounting, Replacement Brushes 6YHY3

6ML63 - Gearmotor, 7 RPM, 90vdc Подробнее...

6ML63 6ML63
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 7.0, Full Load Torque (In.-Lbs.) 330.0, Overhung Load (Lb.) 565, Input HP 1/8, Gear Ratio 336:1, Full Load Amps 0.70TENV Enclosure, None Thermal Protection, All Position Mounting