ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 170rpm, 90vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 170, Full Load Torque (In.-Lbs.) 43.0, Overhung Load (Lb.) 150, Input HP 1/8, Gear Ratio 11:1, Full Load Amps 1.41TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6

Артикул:

4Z128

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

4Z128

Страна производства:

USA

Вес (кг):

5.09

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 90VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 170

Full Load Torque (In.-Lbs.): 43.0

Overhung Load (Lb.): 150

Input HP: 1/8

Gear Ratio: 11:1

Full Load Amps: 1.41

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 10-1/8

Shaft Dimensions (In.): 5/8 x 1 1/2

Bearings: Needle Roller and Thrust Balls on Case, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel

Seals: On Input and Output Shaft

Replacement Brushes: 6YHY6

RPM Range: 151 to 200

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
4Z527 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25	DAYTON 4Z527
4Z827 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, Chassis Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 4.00, Depth (In.) 2.00, Width (In.) 4.90	DAYTON 4Z827
5JJ56 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.30 Inches, Depth 3.30 Inches, Width 2.80 Inches	DART CONTROLS 15DV1A
5JJ57 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.50 Inches, Depth 3.30 Inches, Width 2.80 Inches	DART CONTROLS 15DV2A
5X412 Grainger	Variable DC Speed Control, Output Voltage 90 VDC, Power Rating 1/50 - 1/6 HP, Enclosure NEMA 1, Input Voltage 120 VAC, Speed Range 25:1, Percent of Speed Regulation to Nameplate RPM +/-1%, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 6 Inches, Depth 4 5/16 Inches, Width 4 Inches	DAYTON 5X412

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
2PUX3 Grainger	DC Speed Control, 1/35-1/6 HP, Voltage Output 90, Voltage Input 115, IP30 Enclosure, Speed Range 15:01, Speed Regulation 10-30%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 4A, Display Type None, Protection Type None, IR Compensation None, Follower Circuit None, Mount Type Motor Endbell, SCR PMDC Speed Control Style, Height 3.6 In, Depth 3.19 In, Width 2.61 In	DAYTON 2PUX3
5JJ65 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-20E
6YHY6 Grainger	Replacement Motor Brush Set, DC, Length 1/4 In., Width 5/8 In., Includes 2 Brushes And 2 Springs	DAYTON 6YHY6
6Z392 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-2E

Альтернативная продукция:

2H561 - Gearmotor, 139rpm, 90vdc Подробнее...

2H561 2H561
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC Phase, Nameplate RPM 139, Full Load Torque (In.-Lbs.) 42.0, Overhung Load (Lb.) 220, Input HP 1/10, Gear Ratio 13:1, Full Load Amps 1.08, TENV Enclosure, None Thermal Protection, All Position Mounting, Replacement Brushes 6YHY6

2H573 - Gearmotor, 165rpm, 90vdc Подробнее...

2H573 2H573
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 165, Full Load Torque (In.-Lbs.) 90.0, Overhung Load (Lb.) 200, Input HP 1/4, Gear Ratio 11:1, Full Load Amps 2.51TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHZ0

6ML57 - Gearmotor, 165rpm, 90vdc Подробнее...

6ML57 6ML57
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 165, Full Load Torque (In.-Lbs.) 70.0, Overhung Load (Lb.) 232, Input HP 1/4, Gear Ratio 15:1, Full Load Amps 2.00TENV Enclosure, None Thermal Protection, All Position Mounting