ТЕЛ:+7 (985) 487-07-35
WhatsApp / Telegram: +7 (916) 211-71-00
INFO@ROS-MASTER.RU
ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Turbine Pump, 1 HP, 3 Ph, 3.2/1.6 Amp

Turbine Pump, Close Coupled, 1 HP, 3 Phase, Voltage 208-230/460, 3.7-3.2/1.6 Amps, 60 Hz, Inlet 1 1/4 In., Outlet 1 In., Max. Pressure 168 PSI, Length 15 3/8 In., Height 7 3/4 In., Width 6 11/16 In.
Артикул:
4JPF7
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPF7
Страна производства:
India
Вес (кг):
21.23
4JPF7 Turbine Pump, 1 HP, 3 Ph, 3.2/1.6 Amp
Спецификация:
Item: Turbine pump
Type: Centrifugal
HP: 1
Phase: 3
Voltage: 208-230/460
Amps: 3.7-3.2/1.6
Hz: 60
Inlet (In.): 1-1/4
Outlet (In.): 1
Motor Enclosure: ODP
NEMA/IEC Frame: 56J
Motor RPM: 3450
Motor Type: 3 Phase
Service Factor: 1.4
Wetted Materials: Bronze, Cast Iron,Buna-N, Carbon, Ceramic and 316 Stainless Steel
Impeller Material: Bronze
Housing Material: Cast Iron with nickel plating
Volute Material: Cast Iron with Nickel Plating
Shaft Material: 304 Stainless Steel
Shaft Size (In.): 5/8"
Screw Material: Zinc Plated
Seal Type: Mechanical Seal
Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring
Seal Application: Long Life When Not Run Dry or Pumping Abrasives
Max. Liquid Temp. (F): -20 to 230 Degrees F
GPM @ 10 PSI: 11.2
GPM @ 20 PSI: 10.9
GPM @ 30 PSI: 10.5
GPM @ 40 PSI: 10.1
GPM @ 50 PSI: 9.7
GPM @ 60 PSI: 9.2
GPM @ 75 PSI: 8.6
GPM @ 80 PSI: 8.4
GPM @ 100 PSI: 7.6
Max. Pressure (PSI): 120
Best Efficiency GPM @ Head (Ft.): 8.8 @ 75
Best Efficiency Range GPM @ Head (Ft.): 60 - 100 @ 9.2 - 7.6
Max. Specific Gravity: 1
Max. Case Pressure (PSI): 200
Max. Fluid Viscosity: 100 SSU
Inlet Pressure (PSI): 132
Impeller Type: Open
Bearing Type: Ball
Duty: Continuous
Drain Plug: Easily Accessible at Bottom
Agency Compliance: Motor is UL Recognized
Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials.
Length (In.): 15.35
Height (In.): 7.6
Width (In.): 6.7
Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve.
Includes: OIPM
Обратите внимание:
4JPE3
Turbine Pump, 1 HP, 3 Ph, 3.2/1.6 Amp
4JPG3
Turbine Pump, 3 HP, 1 Ph, 12.5 Amp
4UP51
Pump, Turbine, 1/2 HP
4UP65
Pump, Turbine, 5 HP