Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
1HBL1
Grainger |
 |
HD Silicone Mold Release, Size 16 Oz, Net Weight 12 Oz, Operating Temp Up to 600 F, 5% Silicone Solids, Colorless, Odorless, Non Staining, Rapid Dry, Anti-Stick Mold Release Suitable for Cold and Hot Molds, FDA Regulation 21 CFR 175.300 and 21 CFR 178.3570 |
CRC
03302 |
22N698
Grainger |
 |
Silicone Mold Release, Size 16 oz., Net Weight (Oz.) 11.5, Operating Temp. (F) Up to 600 Degrees , Oily, Colorless, Liquid, Injection and Compression Molding of Abs, Acetyl, Acrylic, Noryl(r), Nylon, Polycarbonate, Polystyrene, Polysulfone, and Wax. Also For Use in Blow Molding, Extruders, Foundries and Investment Castings, Meets FDA Regulation 21 CFR 175.300 and 21 CFR 178.3570, Meets 1998 FDA Guidelines for use in Meat and Poultry Plants |
CRC
3301 |
2F127
Grainger |
 |
Boron Nitride Mold Release, Size 16 Oz, Net Weight 10 Oz, Operating Temp -40 to 500 F, Non Reactive and Non Wetting with Molten Metals and Glass, High Purity, High Temperature Ceramic Mold Release is an Extremely Effective Lubricant for Metal to Metal Contact at High Temperatures |
CRC
03310 |
2F128
Grainger |
 |
Lecithin Mold Release, Size 16 Oz, Net Weight 12 Oz, Operating Temp -40 to 500 F, Clear, Oily, Colorless, Biogradable, Non Silicone, Non Staining, and Non Corrosive, For Injection and Compression Molding of ABS, Acrylic, Nylon, Polycarbonate, Plastic Wrap Equipment, Gaskets and Seals, FDA Regulation 21 CFR 175.300 |
CRC
03306 |
3NZC3
Grainger |
 |
Mold Release, General Purpose 2%, Size 16 Oz, Net Weight 12 Oz, Operating Temp 40 to 550 F, Provides Maximum Release with High Viscosity Silicone, Use for Plastic Injection Molders, Castings, Extruders and Lost Wax Process, NSF 127700, H2 Rated |
SPRAYON
S00302 |
3NZC4
Grainger |
 |
Mold Release, Dry Film P.T.F.E., Size 16 Oz, Net Weight 12 Oz, Operating Temp Up to 575 F, Provides Maximum Release, Non-Silicone, Use for Polystyrenes, Polypropolenes, Nylon, Foams, Metals and Phenolic Resins |
SPRAYON
S0031100 |
4KK78
Grainger |
 |
Dry Film Silicone Lubricant, Can Size 16 Oz, Operating Temp -40 to 500 F, Colorless, Non Flammable, Non Chlorinated, For Releasing Molded Rubber, Plastic, and Metal Parts, Actual Amount of Product in Can or Net Wt. 11 0z. |
LPS
01616 |
4KK82
Grainger |
 |
Dry Film PTFE Lubricant, Size 16 Oz, Net Weight 12 Oz, Operating Temp -40 to 500 F, White Solid, Dry Film, Non Flammable, Non Chlorinated, Will Not Attract Dust, For Releasing Molded Rubber, Plastic, and Metal Parts, USDA H2 |
LPS
02616 |
4TA93
Grainger |
 |
Urethane/Styrene Mold Release, Size 16 Oz, Net Weight 12 Oz, Operating Temp 40 to 550 F, Provides Maximum Release with High Viscosity Silicone, Use for Molding Rubber, Plastic, Elastomerics, Polystyrenes, Polyurethane Foams, and Metal Coatings, None |
SPRAYON
S00315 |
4TA94
Grainger |
 |
Paintable Mold Release, Size 16 Oz, Net Weight 12 Oz, Operating Temp 40 to 550 F, Provides Release with Minimum Amount of Agent, Paintable, Used on Appliance, Housewares, Furniture, Sporting Good, Tire (Green Carcass), Automotive and Electronic Component Molds, None |
SPRAYON
S00309 |
