Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
12A183
Grainger |
 |
Adhesive, Twin Tube, Size 28 oz, Gray, Temp. Range 28 to 80 Degrees F, Curing Time 4 hrs. 20 min., Application Time 30 min., Substrates Concrete, Anchors in Concrete, Polyester, Package Quantity 5 |
MKT FASTENING
7521041 |
12A184
Grainger |
 |
Adhesive, Size 5.5 oz, Gray, Temp. Range 18 to 80 Degrees F, Curing Time 24 hrs. 10 min., Application Time 30 min., Substrates Concrete, Anchors in Concrete, Polyester, Package Quantity 5 |
MKT FASTENING
7511008 |
12Z248
Grainger |
 |
Black Contact Adhesive, Solvent-Based, Temp. Range (F) Up to 180, Application Time 15 min., Curing Time 24 hrs., Substrates Weather Stripping, Vinyl, Rubber, Wood, Metal, Fast Drying And Waterproof. Withstands Temperature Extremes And Is Resistant To Gasoline, Kerosene, And Other Solvents., CFIA |
LOCTITE
30540 |
12Z251
Grainger |
 |
Epoxy Adhesive, Dual Cartridge, Temp. Range (F) Up to 250, Application Time 50 min., Curing Time 24 hrs., Substrates Metals, Thermoplastics, and Thermoset Laminates Without The Use of Primers., Bonding Surfaces Should Be Clean, Dry, and Free of Contamination., Non-SAG, Grey, Impact-Resistannt, High Viscosity, High Peel, High Shear Epoxy With 50-Minute Work Life, Bonds Dissimilar Substrates, 1:1 Mix Ratio. |
LOCTITE
83129 |
12Z253
Grainger |
 |
Epoxy Adhesive, Dual Cartridge, Temp. Range (F) Up to 250, Application Time 5 min., Curing Time 24 hrs., Substrates Suitable for Rough and Poorly Fitting Surfaces Made From Metal, Ceramic, Rigid Plastic, or Wood., Dispense a Small Amount of Adhesive Making Sure Both Parts Are Extruding. Attach Nozzle And Dispense Approximately 25 to 50mm Before Applying Onto Part To Be Bonded. Works For Variety Of Substrates. |
LOCTITE
1086598 |
13A975
Grainger |
 |
Solvent Free Adhesive, Cove Base, Size 29 oz., Beige, Temp. Range 0DF to 120DF, Bonding Range Over 40DF, Application Time 5 to 10 min., VOC Content 29 g/L, Viscosity 145, 000 cps, Environmentally Safe, Contains No Solvents, Fast Grab Adhesion, No Sag Installation, Cleans with Water in Wet State |
TITEBOND
3402 |
19D243
Grainger |
 |
Phenolic Powder, Size 5 lbs., Black |
PHYSICAL TEST SOLUTIONS
155-010 |
19D244
Grainger |
|
Phenolic Powder, Size 5 lbs., Red |
PHYSICAL TEST SOLUTIONS
155-020 |
19D245
Grainger |
|
Phenolic Powder, Size 5 lbs., Green |
PHYSICAL TEST SOLUTIONS
155-030 |
19D246
Grainger |
|
Epoxy Powder, Size 4 lbs. |
PHYSICAL TEST SOLUTIONS
155-200 |
