Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
3EAD6
Grainger |
 |
Finishing Tool, Caulk, Yellow, For Use With Caulk, Sealants, And Adhesives To Create Perfect Bead, Plastic, Flexible Rubber Tip Construction, Includes 2 Caps To Keep Opened Caulk Fresh |
NEWBORN
CB-100 |
3EAD7
Grainger |
 |
Pneumatic Caulk Gun, Cartridge Size 10 oz., Aluminum Barrel MaterialAir Inlet 1/4 In. NPT, Pressure Range 0 to 100 psi, Quick Coupler Plug Retainer Type, Pistol Grip |
NEWBORN
710AL-12 |
3EAD8
Grainger |
 |
Pneumatic Caulk Gun, Cartridge Size 29 oz., Aluminum Barrel MaterialAir Inlet 1/4 In. NPT, Pressure Range 0 to 100 psi, Quick Coupler Plug Retainer Type, Pistol Grip |
NEWBORN
710AL-30 |
3EAD9
Grainger |
 |
Epoxy Applicator, Pneumatic, Dual Component, 1:1, 2:1, 4:1 Mixing Ratio, For Use With 16-oz. and 22-oz. Cartridges, Snap In/Snap Out Push Disks, Cartridge Stabilizing Plate, Steel Body, Nominal Thrust 490 Lbs At 100 PSI, Use With 300mL x 300mL Adhesives, Includes Push Disks for 3 Mix Ratios |
NEWBORN
830A30 |
3EAE1
Grainger |
 |
Epoxy Applicator, Pneumatic, Dual Component, Mixing Ratio 1:1, For Use With Cartridges Up To 56 oz. 2 Part, Snap In/Snap Out Push Disks, Cartridge Stabilizing Plate, Steel Body, Nominal Thrust 1100 Lbs At 100 PSI, Use With 750ml x 750ml; 750ml x 300ml; 750ml x 75ml; 600ml x 600ml; 600ml x 300ml; 300ml x 300ml Adhesives |
NEWBORN
850A75 |
3EAE2
Grainger |
 |
Epoxy Applicator, Manual, Dual Component, Mixing Ratio 1:1, 2:1, 4:1, For Use With Cartridges Up To 2 Part 16 And 22 oz., Snap In/Snap Out Push Disks, Cartridge Stabilizing Plate, Steel Body, 26:1 Thrust Ratio Construction, Use With 300mL x 300mL Adhesives |
NEWBORN
535-XSP |
3EAE3
Grainger |
 |
Epoxy Applicator, Manual, Dual Component, Mixing Ratio 10:1, For Use With 28 oz. Dual Cartridges, Cartridge Stabilizing Plate, Steel Body, 26:1 Thrust Ratio, Heat Treated Piston Rod, Use With 750mL x 75mL Adhesives |
NEWBORN
750-XSP |
3EAE4
Grainger |
 |
Epoxy Applicator, Manual, Dual Component, Mixing Ratio 10:1, For Use With 300ml And 300 x 30 Dual Cartridges, Cartridge Stabilizing Plate, Steel Body, 26:1 Thrust Ratio, Heat Treated Piston Rod, Use With 300mL x 30mL Adhesives |
NEWBORN
335-XSP |
3EAE5
Grainger |
 |
Epoxy Applicator, Manual, Dual Component, Mixing Ratio 1:1, 2:1, 4:1, 10:1, For Use With 200 and 400mL Cartridges, Snap In/Snap Out Push Disks, Steel Body, Use With 400mL Adhesives |
NEWBORN
VR400-XSP |
4NUU4
Grainger |
 |
Push Disk, For Pneumatic Dual Component Applicators, 1:1 Mixing Ratio, For Use With 3EAE1 When Using 1500mL, 1050mL, Or 825mL Cartridges, Replacement Disk, For Dispensing and Mixing Two-Component Epoxy |
NEWBORN
P-85-68 |
