2YDZ4 2YDZ4
DAYTON
Chain, Roller
Nickel Plated Corrosion Resistant Roller Chain, ANSI Chain Size 60NP, Pitch 3/4 Inches, Maximum Allowable Load 1630 Pounds, Rivet End to Center Line 0.581 Inches, Connecting End to Center Line 0.506 Inches, Diameter 0.469 Inches, Overall Width 1.087 Inches, Width 1/2 Inches, 10 Feet Length, Single
Артикул:
6L075
Каталог:
Grainger
Производитель:
TSUBAKI
Номер модели:
60NP
Страна производства:
Taiwan
Вес (кг):
4.75
Спецификация:
| Item: Roller Chain |
| Type: Corrosion Resistant |
| ANSI Chain Size: 60NP |
| Pitch (In.): 3/4 |
| Roller Dia. (In.): 0.469 |
| Width Between Roller Link Plates (In.): 0.500 |
| Overall Width (In.): 1.087 |
| Rivet End to Center Line (In.): 0.506 |
| Connecting End to Center Line (In.): 0.581 |
| Tensile Strength (Lb.): 9900 |
| Max. Allowable Load (Lb.): 1630 |
| Length (Ft.): 10 |
| Temp. Range: 14 to 302F |
| Material: Nickel Plated |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 1A912 Grainger |
 |
Chain Detacher, For Use With Roller Chain, ANSI Type 60-100 | TSUBAKI D-60 |
|
| 2F139 Grainger |
 |
Chain and Wire Lubricant, Type Synthetic, Size 16 oz, Size/Net Weight 10 oz, Temp Range Up to 350 F, Flash Point Less Than 0 F, VOC Content 608 g/L, Specific Gravity 0.6843, Film Type Non Drying, Hydrocarbon Propellant, Contains Organo Molybdenum, Resists Water Wash off and Sling-off, Penetrates Deep and Leaves a Tough Film that Lubricates and Protects, Extends the Working Life of Chains and Wire Rope and Reduces Wear Caused by Friction and Corrosion, Petroleum Base | CRC 03050 |
|
| 6L084 Grainger |
 |
Individual Offset Chain Link, ANSI Chain Size 60NP, For Corrosion Resistant Roller Chain, Package 5 | TSUBAKI 60NP O/L |
|
| 6L093 Grainger |
 |
Individual Roller Chain Connecting Link, ANSI Chain Size 60NP, For Nickel Plated Corrosion Resistant, Package 5 | TSUBAKI 60NP C/L |
|
Альтернативная продукция:
Roller Chain, Corrosion Resistant, ANSI Chain Size 60NP, Pitch 0.750 In, Rivet End to Center Line 0.500 In, Connecting End to Center Line 0.549 In, Hole Dia. 0.233 In, Bushing Dia. 0.33 In, Tensile Strength 8500 Lb., Max. Allowable Load 1980 Lb., Breaking Strength 8500 Lb., Length 10 Ft., Temp. Range 10-150 F, Nickel Plated Material