2YDZ3 2YDZ3
DAYTON
Chain, Roller
Nickel Plated Corrosion Resistant Roller Chain, ANSI Chain Size 50NP, Pitch 5/8 Inches, Maximum Allowable Load 1140 Pounds, Rivet End to Center Line 0.472 Inches, Connecting End to Center Line 0.406 Inches, Diameter 0.400 Inches, Overall Width 0.878 Inches, Width 3/8 Inches, 10 Feet Length, Single
Артикул:
6L074
Каталог:
Grainger
Производитель:
TSUBAKI
Номер модели:
50NP
Страна производства:
Taiwan
Вес (кг):
3.30
Спецификация:
| Item: Roller Chain |
| Type: Corrosion Resistant |
| ANSI Chain Size: 50NP |
| Pitch (In.): 5/8 |
| Roller Dia. (In.): 0.400 |
| Width Between Roller Link Plates (In.): 0.375 |
| Overall Width (In.): 0.878 |
| Rivet End to Center Line (In.): 0.406 |
| Connecting End to Center Line (In.): 0.472 |
| Tensile Strength (Lb.): 7050 |
| Max. Allowable Load (Lb.): 1140 |
| Length (Ft.): 10 |
| Temp. Range: 14 to 302F |
| Material: Nickel Plated |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 1A911 Grainger |
 |
Chain Detacher, For Use With Roller Chain, ANSI Type 25-60 | TSUBAKI D-35 |
|
| 2F139 Grainger |
 |
Chain and Wire Lubricant, Type Synthetic, Size 16 oz, Size/Net Weight 10 oz, Temp Range Up to 350 F, Flash Point Less Than 0 F, VOC Content 608 g/L, Specific Gravity 0.6843, Film Type Non Drying, Hydrocarbon Propellant, Contains Organo Molybdenum, Resists Water Wash off and Sling-off, Penetrates Deep and Leaves a Tough Film that Lubricates and Protects, Extends the Working Life of Chains and Wire Rope and Reduces Wear Caused by Friction and Corrosion, Petroleum Base | CRC 03050 |
|
| 6L083 Grainger |
 |
Individual Offset Chain Link, ANSI Chain Size 50NP, For Corrosion Resistant Roller Chain, Package 5 | TSUBAKI 50NP O/L |
|
| 6L092 Grainger |
 |
Individual Roller Chain Connecting Link, ANSI Chain Size 50NP, For Nickel Plated Corrosion Resistant, Package 5 | TSUBAKI 50NP C/L |
|
Альтернативная продукция:
Roller Chain, Corrosion Resistant, ANSI Chain Size 50NP, Rivet End to Center Line 0.401 In, Connecting End to Center Line 0.450 In, Hole Dia. 0.199 In, Bushing Dia. 0.28 In, Tensile Strength 6100 Lb., Max. Allowable Load 1430 Lb., Breaking Strength 6100 Lb., Length 10 Ft., Temp. Range 10-150 F, Nickel Plated Material