2YDZ2 2YDZ2
DAYTON
Chain, Roller
Nickel Plated Corrosion Resistant Roller Chain, ANSI Chain Size 40NP, Pitch 1/2 Inches, Maximum Allowable Load 660 Pounds, Rivet End to Center Line 0.392 Inches, Connecting End to Center Line 0.325 Inches, Diameter 0.312 Inches, Overall Width 0.717 Inches, Width 5/16 Inches, 10 Feet Length, Single
Артикул:
6L073
Каталог:
Grainger
Производитель:
TSUBAKI
Номер модели:
40NP
Страна производства:
Taiwan
Вес (кг):
2.05
Спецификация:
| Item: Roller Chain |
| Type: Corrosion Resistant |
| ANSI Chain Size: 40NP |
| Pitch (In.): 1/2 |
| Roller Dia. (In.): 0.312 |
| Width Between Roller Link Plates (In.): 0.312 |
| Overall Width (In.): 0.717 |
| Rivet End to Center Line (In.): 0.325 |
| Connecting End to Center Line (In.): 0.392 |
| Tensile Strength (Lb.): 4250 |
| Max. Allowable Load (Lb.): 660 |
| Length (Ft.): 10 |
| Temp. Range: 14 to 302F |
| Material: Nickel Plated |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 1A911 Grainger |
 |
Chain Detacher, For Use With Roller Chain, ANSI Type 25-60 | TSUBAKI D-35 |
|
| 2F139 Grainger |
 |
Chain and Wire Lubricant, Type Synthetic, Size 16 oz, Size/Net Weight 10 oz, Temp Range Up to 350 F, Flash Point Less Than 0 F, VOC Content 608 g/L, Specific Gravity 0.6843, Film Type Non Drying, Hydrocarbon Propellant, Contains Organo Molybdenum, Resists Water Wash off and Sling-off, Penetrates Deep and Leaves a Tough Film that Lubricates and Protects, Extends the Working Life of Chains and Wire Rope and Reduces Wear Caused by Friction and Corrosion, Petroleum Base | CRC 03050 |
|
| 6L082 Grainger |
 |
Individual Offset Chain Link, ANSI Chain Size 40NP, For Corrosion Resistant Roller Chain, Package 5 | TSUBAKI 40NP O/L |
|
| 6L091 Grainger |
 |
Individual Roller Chain Connecting Link, ANSI Chain Size 40NP, For Nickel Plated Corrosion Resistant, Package 5 | TSUBAKI 40NP C/L |
|
Альтернативная продукция:
Roller Chain, Corrosion Resistant, ANSI Chain Size 40NP, Pitch 0.500 In, Rivet End to Center Line 0.320 In, Connecting End to Center Line 0.375 In, Hole Dia. 0.155 In, Bushing Dia. 0.22 In, Tensile Strength 3700 Lb., Max. Allowable Load 810 Lb., Breaking Strength 3700 Lb., Length 10 Ft., Temp. Range 10-150 F, Nickel Plated Material