Gearmotor, 18 RPM, 90vdc
DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC Phase, Nameplate RPM 18, Full Load Torque (In.-Lbs.) 150.0, Overhung Load (Lb.) 150, Input HP 1/20, Gear Ratio 101:1, Full Load Amps 0.62, TENV Enclosure, None Thermal Protection, All Position Mounting, Replacement Brushes 6YHY3
Артикул:
4Z134
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4Z134
Страна производства:
USA
Вес (кг):
4.73
Спецификация:
| Item: DC Gearmotor |
|
Type: Parallel Shaft |
|
Voltage Rating: 90VDC |
|
Phase: DC |
|
Shaft Orientation: Parallel |
|
Nameplate RPM: 18 |
|
Full Load Torque (In.-Lbs.): 150.0 |
|
Overhung Load (Lb.): 150 |
|
Input HP: 1/20 |
|
Gear Ratio: 101:1 |
|
Full Load Amps: 0.62 |
|
Enclosure: TENV |
|
Thermal Protection: None |
|
Ambient (C): 40 |
|
Rotation: Reversible |
|
Mounting: All Position |
|
Length Less Shaft (In.): 8-5/8 |
|
Shaft Dimensions (In.): 5/8 x 1 1/2 |
|
Bearings: Needle Roller and Thrust Balls on Case, Ball on Motor |
|
Lubrication: Permanent Heavy Fluid Gear Oil |
|
Brushes: Externally Replaceable |
|
Gear Case: Die Cast Aluminum |
|
Gears: Hardened Steel, 1st Stage Helical, Subsequent Stages Spur |
|
Seals: Spring Loaded Lip Type on Input and Output Shaft |
|
Replacement Brushes: 6YHY3 |
|
RPM Range: 16 to 30 |
| Необходимая продукция: |
Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
4Z527
Grainger |
 |
Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25 |
DAYTON
4Z527 |
4Z827
Grainger |
 |
Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, Chassis Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 4.00, Depth (In.) 2.00, Width (In.) 4.90 |
DAYTON
4Z827 |
5JJ56
Grainger |
 |
Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.30 Inches, Depth 3.30 Inches, Width 2.80 Inches |
DART CONTROLS
15DV1A |
5JJ57
Grainger |
 |
Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/50-1/6 HP, @ Higher Voltage 1/25-1/3 HP, Input Voltage 120/240 VAC, Speed Range 25:1, Maximum Current 2.0 Amps, Chassis Mount, Acceleration Fixed @ 5 Seconds, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 1.50 Inches, Depth 3.30 Inches, Width 2.80 Inches |
DART CONTROLS
15DV2A |
5X412
Grainger |
 |
Variable DC Speed Control, Output Voltage 90 VDC, Power Rating 1/50 - 1/6 HP, Enclosure NEMA 1, Input Voltage 120 VAC, Speed Range 25:1, Percent of Speed Regulation to Nameplate RPM +/-1%, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Length 6 Inches, Depth 4 5/16 Inches, Width 4 Inches |
DAYTON
5X412 |
| Дополнительные аксессуары: |
Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
2PUX3
Grainger |
 |
DC Speed Control, 1/35-1/6 HP, Voltage Output 90, Voltage Input 115, IP30 Enclosure, Speed Range 15:01, Speed Regulation 10-30%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 4A, Display Type None, Protection Type None, IR Compensation None, Follower Circuit None, Mount Type Motor Endbell, SCR PMDC Speed Control Style, Height 3.6 In, Depth 3.19 In, Width 2.61 In |
DAYTON
2PUX3 |
5JJ65
Grainger |
 |
Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing |
DART CONTROLS
PU-20E |
6YHY3
Grainger |
 |
Replacement Motor Brush Set, DC, Length 1/4 In., Width 1/4 In., Includes 2 Brushes And 2 Springs |
DAYTON
6YHY3 |
6Z392
Grainger |
|
Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing |
DART CONTROLS
PU-2E |
Альтернативная продукция:
DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 19, Full Load Torque (In.-Lbs.) 150.0, Overhung Load (Lb.) 150, Input HP 1/20, Gear Ratio 96:1, Full Load Amps 0.58TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY3
DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 22, Full Load Torque (In.-Lbs.) 280.0, Overhung Load (Lb.) 150, Input HP 1/8, Gear Ratio 82:1, Full Load Amps 1.41TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6
