2ZWR4 2ZWR4
DAYTON
Pump, Centrifugal, 1/3 HP, 1 Ph, 115/230V
Pump, Centrifugal, 1/3 HP, 1 Phase, Voltage 115/230, 7.5/3.8 Amps, Inlet 1 In., Outlet 3/4 In., Motor Enclosure ODP, Housing Material Cast Iron, Impeller Type Semi Open Non-Clogging, Impeller Material Cast-Iron, Max. Head 44 Ft., Seal Type Mechanical, Length 13 In., Width 5 7/8 In., Height 5 7/8 In., 3450 Motor RPM, 60 Hz, Service Factor 1.6, Inlet Pressure 200 PSI
Артикул:
2ZWN9
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2ZWN9
Страна производства:
India
Вес (кг):
15.06
Спецификация:
| Item: Pump |
| Type: Centrifugal |
| HP: 1/3 |
| Phase: 1 |
| Voltage: 115/230 |
| Amps: 7.5/3.8 |
| Inlet (In.): 1 |
| Outlet (In.): 3/4 |
| Motor Enclosure: ODP |
| Housing Material: Cast Iron |
| Impeller Type: Semi Open Non-Clogging |
| Impeller Material: Cast-Iron |
| Max. GPM @ Head (Ft.): 41 @ 10 |
| Best Efficiency GPM @ Head (Ft.): 30 @ 26 |
| Min. GPM @ Head (Ft.): 10 @ 40 |
| Max. Head (Ft.): 44 |
| GPM of Water @ 10 Ft. of Head: 41 |
| GPM of Water @ 15 Ft. of Head: 37 |
| Seal Type: Mechanical |
| Seal Material: Buna-N, Carbon, Ceramic, SS |
| Length (In.): 13 |
| Width (In.): 5-7/8 |
| Height (In.): 5-7/8 |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Hz: 60 |
| Service Factor: 1.6 |
| Wetted Materials: Cast Iron, Buna-N, Carbon, Ceramic, SS |
| Volute Material: Cast Iron |
| Shaft Material: Stainless Steel |
| Shaft Size (In.): 5/8 |
| Screw Material: Steel, Zinc Plated |
| Seal Application: Long life When not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): 200 |
| GPM of Water @ 20 Ft. of Head: 34 |
| GPM of Water @ 25 Ft. of Head: 29 |
| GPM of Water @ 30 Ft. of Head: 25 |
| GPM of Water @ 40 Ft. of Head: 10 |
| Best Efficiency Range GPM @ Head (Ft.): 25-37 @ 30-25 Ft. |
| Max. Specific Gravity: 1.0 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 200 |
| Bearing Type: Ball |
| Max. Pressure (PSI): 18.2 |
| Duty: Continuous |
| Port Rotation: 4 Position |
| Drain Plug: Side and bottom |
| Manufacturers Warranty Length: 1 Year |
| Application: High Flow at Low Head Pressure |
| For Use With: Nonflammable and Nonabrasive Liquids |
| Includes: Manual |
Альтернативная продукция:
Pump, Centrifugal, 1/3 HP, 1 Phase, Voltage 115/230, 7.5/3.8 Amps, Inlet 1 In., Outlet 3/4 In., Motor Enclosure ODP, Housing Material Bronze, Brass, Impeller Type Semi Open Non-Clogging, Impeller Material Bronze, Max. Head 44 Ft., Seal Type Mechanical, Length 13 In., Width 5 7/8 In., Height 5 7/8 In., 3450 Motor RPM, 60 Hz, Service Factor 1.6, Inlet Pressure 200 PSI