ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 6.5rpm, 90vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 6.5, Full Load Torque (In.-Lbs.) 710.0, Overhung Load (Lb.) 900, Input HP 1/6, Gear Ratio 276:1, Full Load Amps 1.00TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6

Артикул:

2H592

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

2H592

Страна производства:

USA

Вес (кг):

9.55

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 90VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 6.5

Full Load Torque (In.-Lbs.): 710.0

Overhung Load (Lb.): 900

Input HP: 1/6

Gear Ratio: 276:1

Full Load Amps: 1.00

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 12-1/2

Shaft Dimensions (In.): 3/4 x 1 7/8

Bearings: Needle Throughout with Thrust Balls on Case, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel, 1st Stage Helical, Subsequent Stages Spur, AGMA Class 9

Seals: Spring Loaded Lip Type on Input and Output Shaft

Replacement Brushes: 6YHY6

RPM Range: 0 to 15

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
2M171 Grainger	Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90 or 180 VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 2M171
4Z527 Grainger	Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25	DAYTON 4Z527
6X165 Grainger	Shunt Wound Volts 100 or 200, 1/50 to 1/4 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 6X165
6Z386 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/8-1 HP, @ Higher Voltage 1/4-2 HP, Input Voltage 120/240 VAC, Speed Range 50:1, Maximum Current 10.0 Amps, Enclosure NEMA 4/12, Adjustable Acceleration, Torque Limit, Current Limit, IR Compensation, Deceleration Fixed, Accepts Tach Feedback, Additional Switches On/Off, Fuse Protected, Length 7.25 Inches, Depth 2.75 Inches, Width 5.53 Inches	DART CONTROLS 253G-200E

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
2H630 Grainger	Mounting Bracket, For Permanent Magnet DC Parallel Shaft Gearmotor, Bolts to Face of Gearmotor, Mount to Floor, Wall or Ceiling, Use on 2H581, 2H583, 2H585, 2H588, 2H590, 2H592, 2H594, 2H606, 2H608, 2H610, 2H612, 2H614, 2H616, 2H618, Includes 4 Screws	DAYTON 2H630
5JJ65 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-20E
6YHY6 Grainger	Replacement Motor Brush Set, DC, Length 1/4 In., Width 5/8 In., Includes 2 Brushes And 2 Springs	DAYTON 6YHY6
6Z392 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-2E

Альтернативная продукция:

2H590 - Gearmotor, 13 RPM, 90vdc Подробнее...

2H590 2H590
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 13, Full Load Torque (In.-Lbs.) 660.0, Overhung Load (Lb.) 900, Input HP 1/6, Gear Ratio 138:1, Full Load Amps 1.70TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6

6Z407 - Gearmotor, 14 RPM, 90vdc Подробнее...

6Z407 6Z407
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 14, Full Load Torque (In.-Lbs.) 960.0, Overhung Load (Lb.) 325, Input HP 1/4, Gear Ratio 131:1, Full Load Amps 2.60TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY9