ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 30 RPM, 24vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 24VDC, DC Phase, Nameplate RPM 30, Full Load Torque (In.-Lbs.) 254.0, Overhung Load (Lb.) 291, Input HP 1/8, Gear Ratio 60:1, Full Load Amps 5.45, TENV Enclosure, None Thermal Protection, All Position Mounting, Replacement Brushes 6YHY5

Артикул:

1L848

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

1L848

Страна производства:

USA

Вес (кг):

6.36

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 24VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 30

Full Load Torque (In.-Lbs.): 254.0

Overhung Load (Lb.): 291

Input HP: 1/8

Gear Ratio: 60:1

Full Load Amps: 5.45

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 10-3/8

Shaft Dimensions (In.): 3/4 x 1

Bearings: Needle with Thrust Ball on Output Shaft, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel

Seals: Spring Loaded Lip Type on Input and Output Shaft

Replacement Brushes: 6YHY5

RPM Range: 16 to 30

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
3VU55 Grainger	Variable DC Speed Control, Output Voltage 0 to 24/0 to 36 VDC, Max HP 1/4 To 1/3, Input Voltage 24/36 VDC, Speed Range 30:1, Maximum Current 10.0 Amps, Chassis Mount, Acceleration Adjustable 0.5 to 8 Seconds, Deceleration Fixed 0.5 Seconds, Current Limit Adjustable, Minimum/Maximum Speed Adjustable, Speed Pot Included, Width 3.63 Inches, Length 4.25 Inches, Depth 1.30 Inches, Includes Speed Potentiometer, Knob and Dial Plate	DART CONTROLS 65E10
5JJ52 Grainger	Variable DC Speed Control, Output Voltage 24/36 VDC, Power Rating @ Lower Voltage 1/15-2/3 HP, @ Higher Voltage 1/8-1 HP, Input Voltage 24/36 VDC, Speed Range 30:1, Maximum Current 20.0 Amps, Chassis Mount, Acceleration/Deceleration Adjustable, Current Limit Adjustable, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Automatic Compensation for Lowering Battery Voltage, Length 7.00 Inches, Depth 1.70 Inches, Width 3.70 Inches, Includes Speed Potentiometer, Knob and Dial Plate	DART CONTROLS 65E20

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
5JJ65 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-20E
6YHY5 Grainger	Replacement Motor Brush Set, DC, Length 5/16 In., Width 9/16 In., Includes 2 Brushes And 2 Springs	DAYTON 6YHY5
6Z392 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-2E

Обратите внимание:

12W364
AC Gearmotor, Parallel, 1 rpm, CCW

7AY84
AC Gearmotor, Parallel, 115V, 2.4rpm, 1/30hp

7AZ45
AC Gearmotor, Parallel, 115V, 3 rpm, 1/3 HP

7CR16
DC Gearmotor, Rt Angle, 24V, 1000rpm, 1/12hp