2LHT6 253G-200E-29
DART CONTROLS
Control, DC, Washdown / NEMA 4/12
Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00
Артикул:
1F794
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
1F794
Страна производства:
USA
Вес (кг):
2.16
Спецификация:
| Item: Control,DC,Washdown / NEMA 4/12 |
| Shunt Wound Volts: 100 or 200 |
| HP: 1/8 to 2 |
| Voltage Output: 90 or 180 VDC |
| Input Voltage: 120/240 VAC |
| Enclosure: NEMA 4/12 |
| Speed Range: 50:1 |
| Speed Regulation: +/- 1 Percent of Motor Base Speed |
| Current/Torque Limit: Adjustable |
| Accepts Tach Feedback: Yes |
| Dynamic Braking: Yes |
| Linear Acceleration: Fixed |
| Linear Deceleration: No |
| Fixed Deceleration (Sec.): 1/2 |
| Power On Light: Yes |
| Protection Type: Fused |
| IR Compensation: Adj. |
| Mount Type: Wall Mount |
| Height (In.): 9.50 |
| Depth (In.): 5.50 |
| Width (In.): 5.00 |
| Operating Temp.: -10 to 40 Degrees C. Ambient (15 to 105 Degrees F.) |
| External Switches: On/Off, Fwd./Rev. |
| HP @ Higher Volts: 1/4 to 2 |
| HP @ Lower Volts: 1/8 to 1 |
| For Use With: For Packagg Equipment, Pumps, Fans, Blowers, Conveyors and Other Constant or Dimishg Torques |
| Includes: Run/Stop Switch, Built-in Transient and Surge Suppression |
| Agency Compliance: UL Pending |
Альтернативная продукция:
DC Speed Control, Reversing, Shunt Wound Volts 100/200 VDC, 1/8 to 1 HP @ 90 VDC, 1/4 to 2 HP @ 180 VDC, Voltage Output 90/180 VDC, Voltage Input 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation 1%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 10.0, Linear Acceleration Adjustable 0.5 to 8 Sec, Linear Deceleration Fixed, Adjustable IR Compensation, Height 7.25 In, Depth 2.75 In, Width 5.53 In
Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90 or 180 VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00