ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Exh Ventilator, Haz Loc, 115/208-230 V

Exhaust Ventilator, Hazardous Location, Centrifugal Belt Drive Downblast, Wheel Dia 18 1/2 In, Wheel Type Backward Incline, CFM @ 0.000-In SP 3655, @ 0.125-In SP 3527, Sones @ 0.125-In SP @ 5 Ft 12.8, Max Inlet Temp 180 Deg F, Motor Voltage 115/208-230, Motor Hz 60, Single Phase, Roof Mounting Location, Base Width 30 In, Base Length 30 In, Includes Hazardous Location Motor that Meets Class I, Groups C and D and Class II, Groups E, F and G

Артикул:

7AE96

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

7AE96

Страна производства:

Not Available

Вес (кг):

62.53

7AE96 Exh Ventilator, Haz Loc, 115/208-230 V

Спецификация:

Item: Centrifugal Downblast Exhaust Ventilator

Type: Hazardous Location

Style: Unassembled With Drive Package

Wheel Dia. (In.): 18-1/2

Wheel Type: Backward Incline

CFM @ 0.000-In. SP: 3655

CFM @ 0.125-In. SP: 3527

CFM @ 0.250-In. SP: 3388

CFM @ 0.375-In. SP: 3234

CFM @ 0.500-In. SP: 3052

CFM @ 0.675-In. SP: 2844

CFM @ 0.750-In. SP: 2601

CFM @ 0.875-In. SP: 2272

Sones @ 0.125-In. SP @ 5 Ft.: 12.8

Sones @ 0.250-In. SP @ 5 Ft.: 12.0

Sones @ 0.500-In. SP @ 5 Ft.: 11.1

Max. Inlet Temp. (Deg. F): 180

Motor Voltage: 115/208-230

Motor Hz: 60

Phase: 1

Max. Operating Amps: 8.8/4.2-4.4

Bearing Type: Regreasable Pillow Block

Motor HP: 1/2

Max. BHP: 0.55

RPM: 940

Speed Controllable: No

Mounting Location: Roof

Base Width (In.): 30

Base Length (In.): 30

Base Height (In.): 1-3/4

Overall Height (In.): 34-3/8

Overall Dia. (In.): 35-1/2

Shaft Dia. Wheel End (In.): 3/4

Shaft Dia. Sheave End (In.): 3/4

Housing Material: Spun Aluminum

Wheel Material: Aluminum

Agency Compliance: UL/cUL 705

Requires: Roof Curb For New Installations

Includes: Hazardous Location Motor that Meets Class I, Groups C and D and Class II, Groups E, F and G

Adj. 12 3/8"H Roof Curb Stock No.: 2ZV83

Adj. 6 3/8"H Roof Curb Stock No.: 4C454

Recommended 12 In. Fixed Curb Item No.: 2RB79

Recommended 8 In. Fixed Curb Item No.: 4HX41

Recommended Damper Size (In.): 23 x 23

Recommended Damper Stock No.: 4HX67

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
2RB79 Grainger	Roof Curb, Fixed, Nonventilated, Curb Height 12 In, Curb Square O D 28 1/2 In, Curb Square I D 25 1/2 In, 18 Gauge Galvanized Steel Construction, Use w/Dayton Ventilators Having a 30 In Square Base, For Use With Flat Roofs Only, Includes Damper Tray	DAYTON 2RB79
2ZV83 Grainger	Roof Curb, Adjustable Width, Non-ventilated, Curb Height 12 In, Curb Square O D 23 1/2 to 32 In, Curb Square I D 19 1/2 to 28 In, 18 Gauge Galvanized Steel Construction, , For Use With UL-705 Installations	DAYTON 2ZV83
4C454 Grainger	Roof Curb, Adjustable Width, Nonventilated, Outside Square 23 1/2 to 32 In, Curb Height 6 3/8 In, 18 Gauge Galvanized Steel Construction, For General Ventilation, Use With Dayton Ventilators Having a Square Base From 25 to 30 1/2 Inches	DAYTON 4C454
4HX41 Grainger	Roof Curb, Fixed, Nonventilated, Inside Square 25 1/2 In, Outside Square 28 1/2 In, Curb Height 8 In, 18 Gauge Galvanized Steel Construction, For General Ventilation Application, Use With Dayton Ventilators Having a 30 In Square Base	DAYTON 4HX41
4HX67 Grainger	Backdraft Damper, Roof Mount, Exhaust, Damper Size 23 x 23 In, Overall Size 25 x 25 In, Flange Width 1 In, Max Velocity 2250 FPM, Construction Material G-90 Galvanized Steel Frame, Aluminum Blades, Stainless Steel Pivot Pins, Nylon Bushings and Galvanized Steel Tie Rods., Includes Pre-punched Conduit Hole Knock-out and Felted Edges For Quiet Operation	DAYTON 4HX67

Альтернативная продукция:

7AE95 - Exh Ventilator, Haz Loc, 115/208-230 V Подробнее...

7AE95 7AE95
DAYTON

Exhaust Ventilator, Hazardous Location, Centrifugal Belt Drive Downblast, Wheel Dia 18 1/2 In, Wheel Type Backward Incline, CFM @ 0.000-In SP 3150, @ 0.125-In SP 2997, Sones @ 0.125-In SP @ 5 Ft 9.9, Max Inlet Temp 180 Deg F, Motor Voltage 115/208-230, Motor Hz 60, Single Phase, Roof Mounting Location, Base Width 30 In, Base Length 30 In, Includes Hazardous Location Motor that Meets Class I, Groups C and D and Class II, Groups E, F and G