ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 34 RPM, 90vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 34, Full Load Torque (In.-Lbs.) 822.0, Overhung Load (Lb.) 325, Input HP 1/2, Gear Ratio 50:1, Full Load Amps 5.00TEFC Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY9

Артикул:

6Z414

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

6Z414

Страна производства:

USA

Вес (кг):

15.73

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 90VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 34

Full Load Torque (In.-Lbs.): 822.0

Overhung Load (Lb.): 325

Input HP: 1/2

Gear Ratio: 50:1

Full Load Amps: 5.00

Enclosure: TEFC

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 14

Shaft Dimensions (In.): 3/4 x 1 1/2

Bearings: Heavy Duty Ball and Thrust Balls on Case, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel, 1st Stage Helical, Subsequent Stages Spur

Seals: Lip Type on Input and Output Shaft

Replacement Brushes: 6YHY9

RPM Range: 31 to 50

Артикул Каталог	Описание	Производитель № модели
Необходимая продукция:
1F794 Grainger	Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 1F794
2M171 Grainger	Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90 or 180 VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 2M171
2M510 Grainger	Variable DC Speed Control, Analog, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/8-1/2 HP, @ Higher Voltage 1/4-1 HP, Input Voltage 120/240 VAC, Speed Range 50:1, Maximum Current 5.0 Amps, Dynamic Braking Capability, Chassis Mount, Acceleration Fixed @ 6 Seconds, Deceleration Fixed, Adjustable Torque Limit, Current Limit, Minimum/Maximum Speed, IR Compensation, Accepts Tach Feedback, Length 4.25 Inches, Depth 1.30 Inches, Width 3.63 Inches	DART CONTROLS 125DV-C-K
5X485 Grainger	Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking No, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00	DAYTON 5X485
6Z386 Grainger	Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/8-1 HP, @ Higher Voltage 1/4-2 HP, Input Voltage 120/240 VAC, Speed Range 50:1, Maximum Current 10.0 Amps, Enclosure NEMA 4/12, Adjustable Acceleration, Torque Limit, Current Limit, IR Compensation, Deceleration Fixed, Accepts Tach Feedback, Additional Switches On/Off, Fuse Protected, Length 7.25 Inches, Depth 2.75 Inches, Width 5.53 Inches	DART CONTROLS 253G-200E

Артикул Каталог	Наименование	Описание	Производитель № модели
Дополнительные аксессуары:
6YHY9 Grainger		Replacement Motor Brush Set, DC, Length 1-1/4 In., Width 3/8 In., Includes 2 Brushes	DAYTON 6YHY9

Альтернативная продукция:

6Z415 - Gearmotor, 40 RPM, 90vdc Подробнее...

6Z415 6Z415
DAYTON

DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 40, Full Load Torque (In.-Lbs.) 664.0, Overhung Load (Lb.) 325, Input HP 1/2, Gear Ratio 41:1, Full Load Amps 5.00TEFC Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY9