5WXU3 5WXU3
DAYTON
Pump, Centrifugal, SS, 1/3 HP, 1 PH
Centrifugal Pump, Self-Priming, 1/3 HP, 1 Phase, Voltage 115/208-230, Amps 8.0/3.5-4.0, Stainless Steel Impeller , 1-1/2 In Inlet, 1-1/2 In Outlet, 3450 RPM, Seal Material Viton, Carbon/Ceramic, Stainless Steel, Max. Liquid Temp. 200 F, Max. Fluid Viscosity 100 SSU, Continuous Duty, 3/8 In Max. Dia. Solids, Motor is UL Recognized, Manufacturers Warranty Length 1 Year
Артикул:
5WXU2
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
5WXU2
Страна производства:
India
Вес (кг):
22.11
Спецификация:
| Item: Centrifugal Pump |
| Type: Self-Priming |
| HP: 1/3 |
| Phase: 1 |
| Voltage: 115/208-230 |
| Amps: 8.0/3.5-4.0 |
| Housing Material: 316 Stainless Steel |
| Impeller Material: Stainless Steel |
| Wetted Materials: Viton, Carbon/Ceramic, Stainless Steel |
| Hz: 60 |
| Inlet (In.): 1-1/2 NPT |
| Outlet (In.): 1-1/2 NPT |
| Motor Enclosure: TEFC |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Service Factor: 1.15 |
| Volute Material: Stainless Steel |
| Shaft Material: Stainless Steel |
| Screw Material: Stainless Steel |
| Seal Type: Mechanical |
| Seal Material: Viton, Carbon/Ceramic, Stainless Steel |
| Seal Application: Long Life When Not Run Dry or Pumping Abrasives |
| GPM of Water @ 2 Ft. of Head: 47 |
| GPM of Water @ 5 Ft. of Head: 45 |
| GPM of Water @ 10 Ft. of Head: 42 |
| GPM of Water @ 15 Ft. of Head: 38 |
| GPM of Water @ 20 Ft. of Head: 34 |
| GPM of Water @ 25 Ft. of Head: 29 |
| GPM of Water @ 30 Ft. of Head: 23 |
| GPM of Water @ 40 Ft. of Head: 8 |
| Max. Head (Ft.): 45 |
| Suction Lift (Ft.): 6 |
| Max. GPM @ Head (Ft.): 47 @ 2 |
| Best Efficiency GPM @ Head (Ft.): 23 @ 30 |
| Min. GPM @ Head (Ft.): 2 @ 44 |
| Best Efficiency Range GPM @ Head (Ft.): 34-14 @ 20-36 |
| Max. Liquid Temp. (F): 200 |
| Max. Specific Gravity: 1 |
| Max. Case Pressure (PSI): 75 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 75 |
| Impeller Type: Open |
| Bearing Type: Ball |
| Duty: Continuous |
| Max. Dia. Solids (In.): 3/8 |
| Port Rotation: Single |
| Drain Plug: Easily Accessible at Bottom |
| Agency Compliance: Motor is UL Recognized |
| Manufacturers Warranty Length: 1 Year |
| Application: Produce High Flow Rates Under Low Head Conditions |
| For Use With: Non-Flammable/Non-Abrasive Liquids, Compatible with Pump Material |
| Height (In.): 9-1/2 |
| Length (In.): 16-3/4 |
| Width (In.): 6-1/8 |
| Includes: Manual |
Альтернативная продукция:
Centrifugal Pump, Self-Priming, 1/2 HP, 1 Phase, Voltage 115/208-230, Amps 8.6/4.0-4.3, Stainless Steel Impeller , 1-1/2 In Inlet, 1-1/2 In Outlet, 3450 RPM, Seal Material Viton, Carbon/Ceramic, Stainless Steel, Max. Liquid Temp. 200 F, Max. Fluid Viscosity 100 SSU, Continuous Duty, 3/8 In Max. Dia. Solids, Motor is UL Recognized, Manufacturers Warranty Length 1 Year
Centrifugal Pump, Self-Priming, 1/3 HP, 1 Phase, Voltage 115/208-230, Amps 8.0/3.5-4.0, Cast Iron Impeller , 1-1/2 In Inlet, 1-1/2 In Outlet, 3450 RPM, Seal Material Buna N, Carbon/Ceramic, Stainless Steel, Max. Liquid Temp. 200 F, Max. Fluid Viscosity 100 SSU, Continuous Duty, 3/8 In Max. Dia. Solids, Motor is UL Recognized, Manufacturers Warranty Length 1 Year