22W739 CJ103051
FLINT & WALLING
Pump, Pressure Booster, 1/2 HP
Pressure Booster Pump, High-Volume, ODP, Housing Material Cast Iron, 1/2 HP, 1 Phase, Voltage 115/230, 13/6.5 Amps, 60 Hz, Inlet 1-1/2 In NPT, Outlet 1-1/4 In NPT, Max. Pressure 30 psi, Suction Lift 25 Ft., Max. Case Pressure 100 psi, 3450 RPM, Motor Type Permanent Split Capacitor, Continuous Duty, Closed, Brass Impeller, Seal Material Stainless Steel, Buna, Carbon/Silicon Carbide, Max. Liquid Temp. 200F, Max. Fluid Viscosity 31 SSU, CSA, CUS, UL Listed, Includes Manual
Артикул:
5UXG6
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
5UXG6
Страна производства:
China
Вес (кг):
18.18
Спецификация:
| Item: Pressure Booster Pump |
| Type: High-Volume |
| Motor Enclosure: ODP |
| Housing Material: Cast Iron |
| HP: 1/2 |
| Phase: 1 |
| Voltage: 115/230 |
| Amps: 13/6.5 |
| Hz: 60 |
| Inlet (In.): 1-1/2 NPT |
| Outlet (In.): 1-1/4 NPT |
| GPM @ 15 PSI: 48 |
| GPM @ 20 PSI: 40 |
| GPM @ 25 PSI: 27 |
| Max. Pressure (PSI): 30 |
| Suction Lift (Ft.): 25 |
| Max. Case Pressure (PSI): 100 |
| Max. PSI Boost @ 2-10 GPM: 28 |
| Max. PSI Boost @ 20 GPM: 26 |
| Max. PSI Boost @ 30 GPM: 24 |
| Max. GPM @ PSI: 48 @ 15 |
| Best Efficiency GPM @ PSI: 35 @ 22 |
| Min. GPM @ PSI: 27 @ 25 |
| Pressure Range (PSI): 0 to 30 |
| Best Efficiency GPM @ Head (Ft.): 35 @ 52 |
| Best Efficiency Range GPM @ Head (Ft.): 43-25 GPM @ 43-60 Ft |
| Motor RPM: 3450 |
| Motor Type: Permanent Split Capacitor |
| Duty: Continuous Duty |
| Wetted Materials: Brass, Cast Iron, Stainless Steel, Buna N, Carbon, Ceramic |
| Impeller Material: Brass |
| Impeller Type: Closed |
| Diffuser Material: Cast Iron |
| Seal Material: Stainless Steel, Buna, Carbon/Silicon Carbide |
| Seal Type: Mechanical |
| Shaft Material: Stainless Steel |
| Seal Application: Clear Water Below 200 PSI |
| Bearing Type: Permanently Lubricated Ball |
| Max. Liquid Temp. (F): 200 |
| Min. Inlet Flow Required: 2 GPM |
| Max. Inlet Pressure (PSI): 70 |
| Stages: 1 |
| Max. Fluid Viscosity: 31 SSU |
| Plug or Connector Type: Direct Wire |
| Length (In.): 13-1/4 |
| Width (In.): 8-1/4 |
| Height (In.): 9-1/4 |
| Motor Ambient Temp. Rating: 149 Degrees F |
| Service Factor: 1.6 |
| Max. Working Pressure (PSI): 100 |
| NEMA/IEC Frame: 56J |
| For Use With: Nonflammable Liquids Compatible with Pump Component Materials |
| Application: Pressure Boosting, Pressure Cleaning, Spray or Mist Systems, Reverse Osmosis, Water Circulation |
| Agency Compliance: CSA, CUS, UL Listed |
| Manufacturers Warranty Length: 1 Year |
| Includes: Manual |
Альтернативная продукция:
Booster Pump, ODP, 1/2 HP, 1 Phase, Voltage 115/230, Amps 13/6.5, 60 Hz, Stages 1, Inlet (In.) 1-1/2 FNPT, Outlet (In.) 1-1/4 FNPT, Max. Pressure 32 PSI, Suction Lift 25 Ft., Max. Liquid Temp. 200 Degrees F, Closed Impeller, Mechanical Seal, Length 13-1/2 In., Width 8-1/4 In., Height 3-5/16 In.