1XLZ8 30SPH10
GOULDS WATER TECHNOLOGY
Pump, Centrifugal, 1-1/2 HP, 1 Ph
Centrifugal Pump, Self-Priming, Housing Material Thermoplastic, Inlet 2 In, Outlet 1-1/2 In, 1-1/2 HP, 1 Phase, Voltage 115/208-230, Amps 17.35/9.54-8.68, 60 Hz, Suction Lift 25 Ft., Shut-Off 115 Ft., Max. Pressure 50 PSI, Stages 1, Motor Enclosure TEFC, Motor Type Capacitor-Start, Capacitor-Run, 3450 RPM, Application Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses, Includes Manual
Артикул:
5RWP5
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
5RWP5
Страна производства:
China
Вес (кг):
22.93
Спецификация:
Item: Centrifugal Pump |
Type: Self-Priming |
HP: 1-1/2 |
Phase: 1 |
Voltage: 115/208-230 |
Amps: 17.35/9.54-8.68 |
Hz: 60 |
Inlet (In.): 2 |
Outlet (In.): 1-1/2 |
Suction Lift (Ft.): 25 |
Length (In.): 18-5/8 |
Width (In.): 6-9/16 |
Height (In.): 11-13/16 |
GPM @ 10 PSI: 67 |
GPM @ 15 PSI: 66 |
GPM @ 20 PSI: 61 |
GPM @ 25 PSI: 55 |
GPM @ 30 PSI: 48 |
GPM @ 35 PSI: 39 |
GPM @ 40 PSI: 33 |
GPM @ 45 PSI: 18 |
Shut-Off (Ft.): 115 |
Max. Pressure (PSI): 50 |
Best Efficiency GPM @ Head (Ft.): 34 @ 85 |
Best Efficiency Range GPM @ Head (Ft.): 18-65 GPM @ 110-65 Ft. |
Stages: 1 |
Motor Enclosure: TEFC |
Motor Type: Capacitor-Start, Capacitor-Run |
NEMA/IEC Frame: 56J |
RPM: 3450 |
Service Factor: 1.1 |
Wetted Materials: Thermoplastic, SS,Viton,Carbon,Ceramic |
Housing Material: Thermoplastic |
Impeller Material: Noryl |
Volute Material: Thermoplastic |
Seal Type: Viton Fitted Mechanical Shaft |
Seal Material: Viton, Carbon, Ceramic, Stainless Steel |
Seal Application: Water |
Shaft Material: Stainless Steel |
Screw Material: Stainless Steel |
GPM of Water @ 2 Ft. of Head: 69 |
Thermal Protection: Automatic Reset |
Bearing Type: Double Shielded Pre Lubricated Ball |
Max. Specific Gravity: 1 |
Max. Case Pressure (PSI): 80 |
Max. Fluid Viscosity: 31 SSU |
Inlet Pressure (PSI): 30 |
Impeller Type: Closed |
Duty: Continuous |
Port Rotation: 90 Degrees Increments |
Drain Plug: Yes |
Agency Compliance: Motor Only CSA |
Manufacturers Warranty Length: 1 Year |
Features: Stainless Steel Fasteners and Inserts |
For Use With: Nonflammable Liquids Compatible with Pump Component Materials |
Application: Water Transfer, Dewatering and Lawn Sprinkling for Residential and Commercial Uses |
Includes: Manual |
Альтернативная продукция:
Centrifugal Pump, Self Priming, 3 HP, 1 Phase, Voltage 115/208-230, 28/14.7-14 Amps, 60 Hz, Inlet 2 In., Outlet 1 1/2 In., Motor Enclosure ODP, 3500 Motor RPM, Service Factor 1.15, Wetted Materials Bronze, Cast Iron, 300 SS, Carbon, Ceramic, Impeller Material Bronze, Housing Material Cast Iron, Seal Type 21, Max. Pressure 60 PSI, Inlet Pressure 15 PSI, Impeller Type Closed, Max. Dia. Solids 1/8 In., Height 13 1/4 In., Length 23 In., Width 10 In.