4UP58 4UP58
DAYTON
Pump, Turbine, 3 HP
Turbine Pump, Bronze-Fitted, 3 HP, 3 Phase, Voltage 208-230/460, Inlet 1 In., Outlet 1 In., Max. Pressure 300 PSI, Length 16 3/4 In., Height 8 3/8 In., Width 8 3/8 In.
Артикул:
4UP57
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4UP57
Страна производства:
USA
Вес (кг):
28.18
Спецификация:
| Item: Turbine Pump |
| Type: Bronze-Fitted |
| HP: 3 |
| Phase: 3 |
| Voltage: 208-230/460 |
| Amps: 8.3-7.6/3.8 |
| Inlet (In.): 1 |
| Outlet (In.): 1 |
| Motor Enclosure: TEFC |
| NEMA/IEC Frame: 56C |
| Motor Type: 3-Phase, TEFC |
| Wetted Materials: Cast Iron, Bronze Fitted |
| Impeller Material: Bronze |
| Housing Material: Cast Iron |
| Volute Material: Cast-Iron, Bronze Fitted |
| Screw Material: Steel |
| Seal Type: Type 21 |
| Seal Material: Carbon, Ceramic, Buna |
| Seal Application: Low Flow, High Head |
| Max. Liquid Temp. (F): -20 to 230 |
| GPM @ 10 PSI: 20.7 |
| GPM @ 20 PSI: 20.0 |
| GPM @ 30 PSI: 19.0 |
| GPM @ 50 PSI: 17.5 |
| GPM @ 60 PSI: 18.2 |
| GPM @ 75 PSI: 14.5 |
| GPM @ 100 PSI: 13.5 |
| Max. Pressure (PSI): 300 |
| Best Efficiency GPM @ Head (Ft.): 15.5 GPM @ 70 PSI |
| Best Efficiency Range GPM @ Head (Ft.): 10.0-19.0 GPM @ 147-35 PSI |
| Max. Specific Gravity: 1.00 SP |
| Max. Case Pressure (PSI): 300 |
| Max. Fluid Viscosity: 250 SSU |
| Inlet Pressure (PSI): 200 |
| Impeller Type: Regenerative Turbine |
| Bearing Type: Sealed Ball Bearing (Motor Bearing) |
| Duty: Continuous |
| Max. Dia. Solids (In.): 25 Microns |
| Port Rotation: 90 Increments |
| Drain Plug: 180 From Inlet Port |
| Agency Compliance: UL, CE & CSA ON MOTOR ONLY |
| Application: For Boiler Feed and Condensate Return Service, Low Flow, Pumping Clean Fluids, Nonflammable Liquids Compatible with Pump Component Materials |
| Length (In.): 16-3/4 |
| Height (In.): 8-3/8 |
| Width (In.): 8-3/8 |
| Construction: Bronze Impeller, Buna N O-Ring Gaskets, Mechanical Seal with Buna N and Stainless Steel Parts and Carbon/Ceramic Seats, Cast Iron Cover and Motor Bracket with Hard Electroless Nickel Plating and Replaceable Bronze Shaft Sleeve |
| Includes: Cast Casing with Bronze Impeller |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 2F896 Grainger |
 |
Pipe Thread Sealant, Temperature Marking Range -50 to 500 Degrees Fahrenheit, Unit Pack 1/2 Pint, Pressure to 10000 PSI Liquid, 3000 PSI Gas | MARKAL 42019G |
|
| 2WV86 Grainger |
 |
Shaft Seal, Regenerative, Includes Seal and Seat | DAYTON 2WV86 |
|
| 2WV89 Grainger |
 |
Shaft Seal Kit, Regenerative, Includes Seal, Seat, and Pump O-Rings | DAYTON 2WV89 |
|
| 4X543 Grainger |
 |
Sealant Tape, Medium Density PTFE, 1/2 x 520 In., Temp. Range (F) -400 To 550, Gas Pressure Range (PSI) 2000, Liquid Pressure Range (PSI) 10, 000, 99.9 Percentage Pure, Standards UL, MIL T-27730A | ANTI-SEIZE 16035 |
|
Альтернативная продукция:
Turbine Pump, Bronze-Fitted, 2 HP, 3 Phase, Voltage 208-230/460, Inlet 1 In., Outlet 1 In., Max. Pressure 300 PSI, Length 15 5/8 In., Height 6 1/2 In., Width 8 3/8 In.