2P531
Pump, Coolant, 1/150 HP
Pump, Coolant, 1/8 HP, 230V, 0.4 Amp
Pump, Coolant, HP 1/8, Phase 3, Amps 0.4, Voltage 230, Length 5 13/16 In., Width 5 1/2 In., Height 14 1/16 In., Inlet/Outlet 3/4 In., RPM 1750, Motor Enclosure TEFC, GPM of Water @ 1 Ft. of Head 12.5, GPM of Water @ 3 Ft. of Head 11.3, GPM of Water @ 5 Ft. of Head 9.8, GPM of Water @ 9 Ft. of Head 4.6, 10, Max. Immersion Depth 6 3/8 In., Max. Recommended Viscosity 500 SSU, Max. Temp. 200 F
Артикул:
4JPH4
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPH4
Страна производства:
China
Вес (кг):
7.86
Спецификация:
| Item: Pump |
| Type: Coolant |
| HP: 1/8 |
| Phase: 3 |
| Amps: 0.4 |
| Voltage: 230 |
| Length (In.): 5-13/16 |
| Width (In.): 5-1/2 |
| Height (In.): 14-1/16 |
| Dia. (In.): 5-9/16 |
| Discharge Port (In.): 3/4 |
| Inlet/Outlet (In.): 3/4 |
| RPM: 1750 |
| Motor Type: 3 Phase |
| Motor Enclosure: TEFC |
| GPH of Water @ 1 Ft. of Head: 750 |
| GPH of Water @ 2 Ft. of Head: 717 |
| GPH of Water @ 3 Ft. of Head: 677 |
| GPH of Water @ 5 Ft. of Head: 588 |
| GPH of Water @ 8 Ft. of Head: 388 |
| GPH of Water @ 9 Ft. of Head: 276 |
| GPM of Water @ 1 Ft. of Head: 12.5 |
| GPM of Water @ 3 Ft. of Head: 11.3 |
| GPM of Water @ 5 Ft. of Head: 9.8 |
| GPM of Water @ 6 Ft. of Head: 9 |
| GPM of Water @ 7 Ft. of Head Low: 7.8 |
| GPM of Water @ 9 Ft. of Head: 4.6 |
| Shut-Off (Ft.): 10 |
| GPM of Oil 500 SSU @ 3 Ft. of Head: 8 |
| GPM of Oil 500 SSU @ 6 Ft. of Head: 4.4 |
| Min. Immersion Depth (In.): 2 |
| Max. Immersion Depth (In.): 6-3/8 |
| Nominal Tank Depth (In.): 8 |
| Impeller Material: 304 SS |
| Body Material: Cast Iron |
| Max. Recommended Viscosity: 500 SSU |
| Max. Temp.: 200 F |
| Shaft Material: Stainless Steel |
| Shaft Seal: Nitrile Butadiene Rubber |
| Application: For Machining Lubricants, Coolants, Flushing and Circulation |
| For Use With: Non-Flammable Liquids Compatible with Pump Component Materials |
