4JPG2
Turbine Pump, 2 HP, 3 Ph, 5.8/2.9 Amp
Turbine Pump, 3/4 HP, 1 Ph, 10.7/5.3 Amp
Turbine Pump, Close Coupled, 3/4 HP, 1 Phase, Voltage 115/208-230, 10.7/5.2-5.3 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 120 PSI, Length 15 1/2 In., Height 8 1/8 In., Width 7 13/16 In.
Артикул:
4JPD9
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
4JPD9
Страна производства:
India
Вес (кг):
20.88
Спецификация:
| Item: Turbine pump |
| Type: Centrifugal |
| HP: 3/4 |
| Phase: 1 |
| Voltage: 115/208-230 |
| Amps: 10.7/5.2-5.3 |
| Hz: 60 |
| Inlet (In.): 1 |
| Outlet (In.): 1 |
| Motor Enclosure: TEFC |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Motor Type: Capacitor-Start, Induction Run |
| Service Factor: 1.15 |
| Wetted Materials: Bronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel |
| Impeller Material: Bronze |
| Housing Material: Bronze |
| Volute Material: Bronze |
| Shaft Material: 304 Stainless Steel |
| Shaft Size (In.): 5/8" |
| Screw Material: SS |
| Seal Type: Mechanical Seal |
| Seal Material: Buna-N with Carbon and Ceramic Faces & 316 Stainless Steel Spring |
| Seal Application: Long Life When Not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): -20 to 230 Degrees F |
| GPM @ 10 PSI: 5.5 |
| GPM @ 20 PSI: 4.9 |
| GPM @ 30 PSI: 4.4 |
| GPM @ 40 PSI: 3.8 |
| GPM @ 50 PSI: 3.4 |
| GPM @ 60 PSI: 2.8 |
| GPM @ 75 PSI: 2.2 |
| GPM @ 80 PSI: 1.9 |
| GPM @ 100 PSI: 1 |
| GPM of Water @ 120 PSI: 0.4 |
| Max. Pressure (PSI): 120 |
| Best Efficiency GPM @ Head (Ft.): 2.8 @ 60 |
| Best Efficiency Range GPM @ Head (Ft.): 35 - 75 @ 4.1 - 2.2 |
| Max. Specific Gravity: 1 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 60 |
| Impeller Type: Open |
| Bearing Type: Ball |
| Duty: Continuous |
| Drain Plug: Easily Accessible at Bottom |
| Agency Compliance: Motor is UL Recognized |
| Application: For boiler feed and condensate return service, low flow, pumping clean fluids, non flamable liquids compatable with pump component materials. |
| Length (In.): 15.5 |
| Height (In.): 8.1 |
| Width (In.): 7.9 |
| Construction: Bronze impeller, Buna-N O-ring gaskets, mechanical seal with Buna-N and stainless steel parts and carbon / ceramic seats, cast iron cover and motor bracket with hard electroless nickel plating and replacable bronze shaft sleeve. |
| Includes: OIPM |
| Дополнительные аксессуары: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 3ACE5 Grainger |
 |
Replacement Pump Shaft Seal, Shaft Size 7/8 In, Seal Bore 7/8 In, Nominal Working Length (In) 1 15/64, Seat Bore 1 1/2 In, Seat Thickness 0.405, Material Content Code VCRJR, Seal Material Viton, Carbon, Ceramic, Max Temp 200 F, Min Temp Rating 40 Deg F | DAYTON 3ACE5 |
|
| 3ACF8 Grainger |
 |
Replacement Pump Shaft Seal, Shaft Size 7/8 In, Seal Bore 7/8 In, Nominal Working Length (In) 1 15/64, Seat Bore 1 1/2 In, Seat Thickness 0.405, Material Content Code BCRJR, Seal Material Buna, Carbon, Ceramic, Max Temp 160 F, Min Temp Rating -25 Deg F | DAYTON 3ACF8 |
|
