1XLK8
Pumping System, Tank 5 Gal
Pump, Oil Coolant
Oil Coolant Pump, Self Priming, HP 1/20, Phase 3, Amps 0.27/0.135, Voltage 230/460, Length 7 1/4 In., Width 5 In., Height 7 3/16 In., Inlet/Outlet 1/4 In., RPM 3440, GPM of Water @ 3 Ft. of Head 8.0, GPM of Water @ 5 Ft. of Head 7.2, 19, Max. Recommended Viscosity 800 at 50 hz, 300 at 60 hz, Max. Temp. 104
Артикул:
3P726
Каталог:
Grainger
Производитель:
FUJI
Номер модели:
VKN-043A-4Z
Страна производства:
Taiwan
Вес (кг):
5.36
Спецификация:
| Item: Oil Coolant Pump |
| Type: Suction |
| HP: 1/20 |
| Phase: 3 |
| Amps: 0.27/0.135 |
| Voltage: 230/460 |
| Length (In.): 7-1/4 |
| Width (In.): 5 |
| Height (In.): 7-3/16 |
| Bolt Circle Dia. (In.): 5.11 |
| Inlet/Outlet (In.): 1/4 |
| RPM: 3440 |
| GPM of Water @ 3 Ft. of Head: 8.0 |
| GPM of Water @ 5 Ft. of Head: 7.2 |
| GPM of Water @ 7 Ft. of Head Low: 6.9 |
| GPM of Water @ 10 Ft. of Head: 5.9 |
| GPM of Water @ 13 Ft. of Head Low: 4.5 |
| GPM of Water @ 15 Ft. of Head: 3.8 |
| GPM of Water @ 16 Ft. of Head: 2.6 |
| Shut-Off (Ft.): 19 |
| Impeller Material: Plastic |
| Body Material: Cast Iron |
| Max. Recommended Viscosity: 800 at 50 hz, 300 at 60 hz |
| Max. Temp.: 104 |
| Shaft Material: Carbon Steel |
| Shaft Seal: Mechanical Seal |
| Elastomer: Buna N |
| Application: Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Except Grinders |
| Includes: Ceramic stationary seal face, carbon graphite rotating seal face, and steel springs |
| Необходимая продукция: | ||||
Артикул Каталог |
Наименование |
Описание | Производитель № модели |
|
|---|---|---|---|---|
| 6Y645 Grainger |
 |
TriCut Fluid, Spout Top Can, 4 oz.Ideal for Difficult Cutting Operations Including Long Duration Extreme Pressure Cuts, Use on all Materials, Special Blend of Extreme Pressure Lubricants Penetrate to the Cutting Edge to Break Down Surface Tension, Stress and Prevent Metal-to-metal Adhesion, OSHA Hazard Communication, Material Safety Data Sheets | TAP MAGIC 10004E |
|
