12U575
Sludge Pump, 7.5 HP, 230 Volts, 30.8 Amps
Automatic Dewatering Pump, 2/3 HP, 110V
Automatic Submersible Dewatering Pump, 2/3 HP, Voltage 110, Amps 6.1, Cord Length 32 ft., Discharge NPT 2 In, Maximum Head 39.5 ft., Diameter 8-3/4 In, Die Cast Aluminum Housing, Urethane Rubber Impeller Material, Max. Dia. Solids 1/4 In, Max. Liquid Temp. 104 Degrees F, Length 11-1/4 In, Width 8-3/4 In
Артикул:
38H467
Каталог:
Grainger
Производитель:
TSURUMI
Номер модели:
LB-480A
Страна производства:
Taiwan
Вес (кг):
13.64
Спецификация:
| Item: Automatic Submersible Dewatering Pump |
| Type: Construction Site and Residential Dewatering |
| HP: 2/3 |
| Voltage: 110 |
| Amps: 6.1 |
| Cord Length: 32 ft. |
| Cord Size: 16/3 |
| Cord Type: 3-Conductor STOW, Resists Water and Oil |
| Discharge NPT: 2" |
| GPM @ 1 Ft. of Head: 62 |
| GPM of Water @ 5 Ft. of Head: 62 |
| GPM of Water @ 10 Ft. of Head: 57 |
| GPM of Water @ 15 Ft. of Head: 50 |
| GPM of Water @ 20 Ft. of Head: 44 |
| GPM of Water @ 25 Ft. of Head: 36 |
| GPM of Water @ 30 Ft. of Head: 23 |
| GPM of Water @ 35 Ft. of Head: 11 |
| Maximum Head: 39.5 ft. |
| Height: 11-1/4" |
| Diameter: 8-3/4" |
| Housing: Die Cast Aluminum |
| Top Material: Die Cast Aluminum |
| Base Material: Steel |
| Impeller Material: Urethane Rubber |
| Length: 11-1/4" |
| Width: 8-3/4" |
| Max. Dia. Solids: 1/4" |
| Max. Liquid Temp.: 104 Degrees F |
| Min. Sump Pit Dia.: 12" |
| Motor Type: PSC |
| Thermal Protection: Automatic |
| Motor Housing: Die Cast Aluminum |
| Phase: 1 |
| RPM: 3255 |
| Hz: 60 |
| Insulation Class: E |
| Bearing Type: Double Shielded, Permanently Lubricated, High Temperature C3 Ball Bearings Rated for a B-10 Life |
| Shaft Material: SS |
| Shaft Seal: Silicone Carbide |
| Suction: Screened Bottom |
| Duty: Continuous |
| Handle: Top Carrying |
| Function: Dewatering |
| Application: Drain Standing Water In Shallow Areas Such as Basements, Sumps, Construction and Dump Sites. |
| For Use With: Nonflammable Liquids |
| Agency Compliance: Etl/Cetl |
| Warranty: 2 Years |
