1N490
Pump, Centrifugal, 3 HP
Centrifugal Pump, 3 HP, 3 Ph, 208-230/460V
Centrifugal Pump, High Head, Housing Material Stainless Steel, 3 HP, 3 Phase, Voltage 208-230/460, Amps 8.3-7.6/3.8, 60 Hz, Inlet 1 1/2 In., Outlet 1 1/4 In., Motor Enclosure TEFC, Service Factor 1.15, Impeller Type Closed, Impeller Material Stainless Steel, Seal Material Viton, Max. Head 131 Ft., Length 16 7/8 In., Width 8 3/4 In., Height 9 In.
Артикул:
2ZXL6
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2ZXL6
Страна производства:
India
Вес (кг):
31.82
Спецификация:
| Item: Centrifugal Pump |
| Type: High Head |
| Housing Material: Stainless Steel |
| HP: 3 |
| Phase: 3 |
| Voltage: 208-230/460 |
| Amps: 8.3-7.6/3.8 |
| Hz: 60 |
| Inlet (In.): 1-1/2 |
| Outlet (In.): 1-1/4 |
| Motor Enclosure: TEFC |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Motor Type: TEFC |
| Service Factor: 1.15 |
| Impeller Type: Closed |
| Impeller Material: Stainless Steel |
| Volute Material: Stainless Steel |
| Shaft Material: Stainless Steel |
| Screw Material: Stainless Steel |
| Seal Type: Mechanical Carbon on Ceramic |
| Seal Material: Viton |
| Seal Application: Long life When Not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): 200 |
| GPM of Water @ 10 Ft. of Head: 107 |
| GPM of Water @ 15 Ft. of Head: 105 |
| GPM of Water @ 20 Ft. of Head: 103 |
| GPM of Water @ 25 Ft. of Head: 100 |
| GPM of Water @ 30 Ft. of Head: 98 |
| GPM of Water @ 40 Ft. of Head: 92 |
| GPM of Water @ 50 Ft. of Head: 87 |
| GPM of Water @ 60 Ft. of Head: 79 |
| GPM of Water @ 70 Ft. of Head: 72 |
| GPM of Water @ 80 Ft. of Head: 63 |
| GPM of Water @ 90 Ft. of Head: 55 |
| GPM of Water @ 100 Ft. of Head: 43 |
| GPM of Water @ 110 Ft. of Head: 32 |
| GPM of Water @ 114 Ft. of Head: 25 |
| GPM of Water @ 120 Ft. of Head: 17 |
| GPM of Water @ 130 Ft. of Head: 2 |
| Max. Head (Ft.): 131 |
| Min. GPM @ Head (Ft.): 2 @ 130 |
| Max. GPM @ Head (Ft.): 107 @ 10 |
| Best Efficiency GPM @ Head (Ft.): 70 @ 72 |
| Best Efficiency Range GPM @ Head (Ft.): 40-87 @ 100-50 Ft. |
| Max. Specific Gravity: 1.0 |
| Wetted Materials: SS, Viton, Carbon, Ceramic |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 200 |
| Bearing Type: Ball |
| Duty: Continuous |
| Port Rotation: 4 Position Increments |
| Drain Plug: Easily Accessible |
| Manufacturers Warranty Length: 1 Year |
| Application: Rugged Close-Coupled Pumps Continuously Produce High Head Condition |
| For Use With: Nonflammable and Nonabrasive Liquids |
| Length (In.): 16-7/8 |
| Width (In.): 8-3/4 |
| Height (In.): 9 |
| Includes: Manual |
