2ZWX1 2ZWX1
DAYTON
Pump, Centrifugal, 3 HP, 1 Ph, 230V
Pump, Centrifugal, 3 HP, 1 Phase, Voltage 230, -/12.5 Amps, Inlet 2 In., Outlet 1 1/2 In., Motor Enclosure TEFC, Housing Material Bronze, Brass, Impeller Type Semi Open Non-Clogging, Impeller Material Bronze, Brass, Max. Head 74 Ft., Seal Type Mechanical, Length 14 13/16 In., Width 7 5/8 In., Height 7 In., 3450 Motor RPM, 60 Hz, Service Factor 1, Inlet Pressure 207 PSI
Артикул:
2ZWT6
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2ZWT6
Страна производства:
India
Вес (кг):
50.45
Спецификация:
| Item: Pump |
| Type: Centrifugal |
| HP: 3 |
| Phase: 1 |
| Voltage: 230 |
| Amps: -/12.5 |
| Inlet (In.): 2 |
| Outlet (In.): 1-1/2 |
| Motor Enclosure: TEFC |
| Housing Material: Bronze, Brass |
| Impeller Type: Semi Open Non-Clogging |
| Impeller Material: Bronze, Brass |
| Max. GPM @ Head (Ft.): 170 @ 10 |
| Best Efficiency GPM @ Head (Ft.): 119 @ 57 |
| Min. GPM @ Head (Ft.): 35 @ 70 |
| Max. Head (Ft.): 74 |
| GPM of Water @ 10 Ft. of Head: 170 |
| GPM of Water @ 15 Ft. of Head: 166 |
| Seal Type: Mechanical |
| Seal Material: Buna-N, Carbon, Ceramic, SS |
| Length (In.): 14-13/16 |
| Width (In.): 7-5/8 |
| Height (In.): 7 |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Hz: 60 |
| Service Factor: 1 |
| Wetted Materials: Bronze, Brass, Buna-N, Carbon, Ceramic, SS |
| Volute Material: Bronze, Brass |
| Shaft Material: Stainless Steel |
| Shaft Size (In.): 5/8 |
| Screw Material: Steel, Zinc Plated |
| Seal Application: Long life When not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): 200 |
| GPM of Water @ 20 Ft. of Head: 162 |
| GPM of Water @ 25 Ft. of Head: 154 |
| GPM of Water @ 30 Ft. of Head: 146 |
| GPM of Water @ 40 Ft. of Head: 130 |
| GPM of Water @ 50 Ft. of Head: 110 |
| GPM of Water @ 60 Ft. of Head: 82 |
| GPM of Water @ 70 Ft. of Head: 35 |
| Best Efficiency Range GPM @ Head (Ft.): 60-144 @ 75-35 Ft. |
| Max. Specific Gravity: 1.0 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 207 |
| Bearing Type: Ball |
| Max. Pressure (PSI): 32 |
| Duty: Continuous |
| Port Rotation: 4 Position |
| Drain Plug: Side and bottom |
| Manufacturers Warranty Length: 1 Year |
| Application: High Flow at Low Head Pressure |
| For Use With: Nonflammable and Nonabrasive Liquids |
| Includes: Manual |
Альтернативная продукция:
Pump, Centrifugal, 3 HP, 1 Phase, Voltage 230, -/12.5 Amps, Inlet 2 In., Outlet 1 1/2 In., Motor Enclosure TEFC, Housing Material Stainless Steel, Impeller Type Semi Open Non-Clogging, Impeller Material Stainless Steel, Max. Head 74 Ft., Seal Type Mechanical, Length 14 13/16 In., Width 7 5/8 In., Height 7 In., 3450 Motor RPM, 60 Hz, Service Factor 1, Inlet Pressure 220 PSI