2ZWU7 2ZWU7
DAYTON
Centrifugal Pump, 1.5 HP, 3 Ph, 208-230/460
Centrifugal Pump, 1 1/2 HP, 3 Phase, Voltage 208-230/460, 4.4-3.9/2.0 Amps, Inlet 1 1/2 In., Outlet 1 1/4 In., Motor Enclosure ODP, Housing Material Bronze, Brass, Impeller Type Semi Open Non-Clogging, Impeller Material Bronze, Brass, Max. Head 67 Ft., Seal Type Mechanical, Length 15 In., Width 7 1/8 In., Height 6 In., 3450 Motor RPM, 60 Hz, Service Factor 1.3, Inlet Pressure 204 PSI
Артикул:
2ZWT3
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2ZWT3
Страна производства:
India
Вес (кг):
23.18
Спецификация:
| Item: Pump |
| Type: Centrifugal |
| HP: 1-1/2 |
| Phase: 3 |
| Voltage: 208-230/460 |
| Amps: 4.4-3.9/2.0 |
| Inlet (In.): 1-1/2 |
| Outlet (In.): 1-1/4 |
| Motor Enclosure: ODP |
| Housing Material: Bronze, Brass |
| Impeller Type: Semi Open Non-Clogging |
| Impeller Material: Bronze, Brass |
| Max. GPM @ Head (Ft.): 115 @ 10 |
| Best Efficiency GPM @ Head (Ft.): 72 @ 44 |
| Min. GPM @ Head (Ft.): 40 @ 60 |
| Max. Head (Ft.): 67 |
| GPM of Water @ 10 Ft. of Head: 115 |
| GPM of Water @ 15 Ft. of Head: 109 |
| Seal Type: Mechanical |
| Seal Material: Buna-N, Carbon, Ceramic, SS |
| Length (In.): 15 |
| Width (In.): 7-1/8 |
| Height (In.): 6 |
| NEMA/IEC Frame: 56J |
| Motor RPM: 3450 |
| Hz: 60 |
| Service Factor: 1.3 |
| Wetted Materials: Bronze, Brass, Buna-N, Carbon, Ceramic, SS |
| Volute Material: Bronze, Brass |
| Shaft Material: Stainless Steel |
| Shaft Size (In.): 5/8 |
| Screw Material: Steel, Zinc Plated |
| Seal Application: Long life When not Run Dry or Pumping Abrasives |
| Max. Liquid Temp. (F): 200 |
| GPM of Water @ 20 Ft. of Head: 104 |
| GPM of Water @ 25 Ft. of Head: 99 |
| GPM of Water @ 30 Ft. of Head: 94 |
| GPM of Water @ 40 Ft. of Head: 81 |
| GPM of Water @ 50 Ft. of Head: 64 |
| GPM of Water @ 60 Ft. of Head: 40 |
| Best Efficiency Range GPM @ Head (Ft.): 55-99 @ 55-25 Ft. |
| Max. Specific Gravity: 1.0 |
| Max. Case Pressure (PSI): 200 |
| Max. Fluid Viscosity: 100 SSU |
| Inlet Pressure (PSI): 204 |
| Bearing Type: Ball |
| Max. Pressure (PSI): 29 |
| Duty: Continuous |
| Port Rotation: 4 Position |
| Drain Plug: Side and bottom |
| Manufacturers Warranty Length: 1 Year |
| Application: High Flow at Low Head Pressure |
| For Use With: Nonflammable and Nonabrasive Liquids |
| Includes: Manual |
Альтернативная продукция:
Centrifugal Pump, 1 1/2 HP, 3 Phase, Voltage 208-230/460, 4.4-3.9/2.0 Amps, Inlet 1 1/2 In., Outlet 1 1/4 In., Motor Enclosure ODP, Housing Material Stainless Steel, Impeller Type Semi Open Non-Clogging, Impeller Material Stainless Steel, Max. Head 67 Ft., Seal Type Mechanical, Length 15 In., Width 7 1/8 In., Height 6 In., 3450 Motor RPM, 60 Hz, Service Factor 1.3, Inlet Pressure 217 PSI