2PTX2 72487
NIAGARA CUTTER
End Mill, Roughing, Co, 1 1/2, 6 FL, Sq End
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, Bright Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 30 Deg, Rhh 30 Deg, Good For Alloy, Carbon And Tool Steel, Aluminum, Cast Iron, Stainless Steel And Steel Hardened Up To 35 HrC
Артикул:
2PNC3
Каталог:
Grainger
Производитель:
OSG
Номер модели:
4913700
Страна производства:
Japan
Вес (кг):
1.01
Спецификация:
| Item: Cobalt End Mill |
| Grade: General Purpose |
| List Number: 490 |
| Type: Roughing, Coarse Pitch |
| End Style: Square |
| End: Single |
| Dimension Type: Fractional Inch |
| Diameter: 1-1/2" |
| Shank Dia.: 1-1/4" |
| Length of Cut: 4" |
| Overall Length: 6-1/2" |
| Number of Flutes: 6 |
| Cutting Type: Non-Center |
| Cutting Direction: Right Hand |
| Helix Angle: 30 Degrees |
| Corner Radius: 0 |
| Finish: Bright |
| Application: For Alloy, Carbon, Tool Steel, Aluminum, Cast Iron, Stainless Steel and Steel Hardened Up To 35 HrC |
Альтернативная продукция:
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, Uncoated Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, TiN Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 10 Deg, Rhh 30 Deg, For Profiling And Slotting In Most Materials
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, Bright Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 30 Deg, Rhh 30 Deg, For Tough Alloys, Titanium, Stainless Steel , Iconel And Nickel Base Alloy
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, TiCN Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 30 Deg, Rhh 30 Deg, For Tough Alloys, Titanium, Stainless Steel , Iconel And Nickel Base Alloy
End Mill, Roughing, Coarse Pitch, General Purpose, Number of Flutes 6, Single End, Square End Style, Non-Center Cutting Type, Right Hand Cut, Cobalt Steel, TiAlN Finish, Dia 1 1/2 In, Shank Dia 1 1/4 In, Length of Cut 4 In, Overall Length 6 1/2 In, Rhc 30 Deg, Rhh 30 Deg, For Tough Alloys, Titanium, Stainless Steel , Iconel And Nickel Base Alloy