Gearmotor, 15 RPM, 90vdc
DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 15, Full Load Torque (In.-Lbs.) 570.0, Overhung Load (Lb.) 900, Input HP 1/6, Gear Ratio 116:1, Full Load Amps 1.70TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6
Артикул:
2H588
Каталог:
Grainger
Производитель:
DAYTON
Номер модели:
2H588
Страна производства:
USA
Вес (кг):
9.98
Спецификация:
| Item: DC Gearmotor |
|
Type: Parallel Shaft |
|
Voltage Rating: 90VDC |
|
Phase: DC |
|
Shaft Orientation: Parallel |
|
Nameplate RPM: 15 |
|
Full Load Torque (In.-Lbs.): 570.0 |
|
Overhung Load (Lb.): 900 |
|
Input HP: 1/6 |
|
Gear Ratio: 116:1 |
|
Full Load Amps: 1.70 |
|
Enclosure: TENV |
|
Thermal Protection: None |
|
Ambient (C): 40 |
|
Rotation: Reversible |
|
Mounting: All Position |
|
Length Less Shaft (In.): 12-1/2 |
|
Shaft Dimensions (In.): 3/4 x 1 7/8 |
|
Bearings: Needle Throughout with Thrust Balls on Case, Ball on Motor |
|
Lubrication: Permanent Heavy Fluid Gear Oil |
|
Brushes: Externally Replaceable |
|
Gear Case: Die Cast Aluminum |
|
Gears: Hardened Steel, 1st Stage Helical, Subsequent Stages Spur, AGMA Class 9 |
|
Seals: Spring Loaded Lip Type on Input and Output Shaft |
|
Replacement Brushes: 6YHY6 |
|
RPM Range: 0 to 15 |
| Необходимая продукция: |
Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
2M171
Grainger |
 |
Shunt Wound Volts 100 or 200, 1/8 to 2 HP, Voltage Output 90 or 180 VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00 |
DAYTON
2M171 |
4Z527
Grainger |
 |
Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, NEMA 1 Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 5.00, Depth (In.) 1.88, Width (In.) 4.25 |
DAYTON
4Z527 |
6X165
Grainger |
|
Shunt Wound Volts 100 or 200, 1/50 to 1/4 HP, Voltage Output 90/180VDC, Input Voltage 120/240 VAC, NEMA 4/12 Enclosure, Speed Range 50:1, Speed Regulation +/- 1 Percent of Motor Base Speed, Current/Torque Limit Adjustable, Accepts Tach Feedback Yes, Dynamic Braking Yes, Linear Acceleration Fixed, Linear Deceleration No, Fixed Deceleration (Sec.) 1/2, Power On Light Yes, Protection Type Fused, IR Compensation Adj., Mount Type Wall Mount, Height (In.) 9.50, Depth (In.) 5.50, Width (In.) 5.00 |
DAYTON
6X165 |
6Z386
Grainger |
 |
Variable DC Speed Control, Output Voltage 90/180 VDC, Shunt Wound Voltage 100/200 VDC, Power Rating @ Lower Voltage 1/8-1 HP, @ Higher Voltage 1/4-2 HP, Input Voltage 120/240 VAC, Speed Range 50:1, Maximum Current 10.0 Amps, Enclosure NEMA 4/12, Adjustable Acceleration, Torque Limit, Current Limit, IR Compensation, Deceleration Fixed, Accepts Tach Feedback, Additional Switches On/Off, Fuse Protected, Length 7.25 Inches, Depth 2.75 Inches, Width 5.53 Inches |
DART CONTROLS
253G-200E |
| Дополнительные аксессуары: |
Артикул
Каталог |
Наименование |
Описание |
Производитель
№ модели |
2H630
Grainger |
 |
Mounting Bracket, For Permanent Magnet DC Parallel Shaft Gearmotor, Bolts to Face of Gearmotor, Mount to Floor, Wall or Ceiling, Use on 2H581, 2H583, 2H585, 2H588, 2H590, 2H592, 2H594, 2H606, 2H608, 2H610, 2H612, 2H614, 2H616, 2H618, Includes 4 Screws |
DAYTON
2H630 |
2PUX3
Grainger |
 |
DC Speed Control, 1/35-1/6 HP, Voltage Output 90, Voltage Input 115, IP30 Enclosure, Speed Range 15:01, Speed Regulation 10-30%, Current/Torque Limit Adjustable, Accepts Tach Feedback, Max Amps 4A, Display Type None, Protection Type None, IR Compensation None, Follower Circuit None, Mount Type Motor Endbell, SCR PMDC Speed Control Style, Height 3.6 In, Depth 3.19 In, Width 2.61 In |
DAYTON
2PUX3 |
5JJ65
Grainger |
 |
Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing |
DART CONTROLS
PU-20E |
6YHY6
Grainger |
 |
Replacement Motor Brush Set, DC, Length 1/4 In., Width 5/8 In., Includes 2 Brushes And 2 Springs |
DAYTON
6YHY6 |
6Z392
Grainger |
|
Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing |
DART CONTROLS
PU-2E |
Альтернативная продукция:
DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 13, Full Load Torque (In.-Lbs.) 660.0, Overhung Load (Lb.) 900, Input HP 1/6, Gear Ratio 138:1, Full Load Amps 1.70TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY6
DC Gearmotor, Parallel Shaft, Voltage Rating 90VDC, DC PhaseNameplate RPM 14, Full Load Torque (In.-Lbs.) 960.0, Overhung Load (Lb.) 325, Input HP 1/4, Gear Ratio 131:1, Full Load Amps 2.60TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY9
