ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Gearmotor, 31 RPM, 12vdc

DC Gearmotor, Parallel Shaft, Voltage Rating 12VDC, DC PhaseNameplate RPM 31, Full Load Torque (In.-Lbs.) 278.0, Overhung Load (Lb.) 150, Input HP 1/6, Gear Ratio 58:1, Full Load Amps 13.98TENV Enclosure, None Thermal Protection, All Position MountingReplacement Brushes 6YHY5

Артикул:

1Z822

Каталог:

Grainger

Производитель:

DAYTON

Номер модели:

1Z822

Страна производства:

USA

Вес (кг):

6.36

Спецификация:

Item: DC Gearmotor

Type: Parallel Shaft

Voltage Rating: 12VDC

Phase: DC

Shaft Orientation: Parallel

Nameplate RPM: 31

Full Load Torque (In.-Lbs.): 278.0

Overhung Load (Lb.): 150

Input HP: 1/6

Gear Ratio: 58:1

Full Load Amps: 13.98

Enclosure: TENV

Thermal Protection: None

Ambient (C): 40

Rotation: Reversible

Mounting: All Position

Length Less Shaft (In.): 10-1/8

Shaft Dimensions (In.): 5/8 x 1 1/2

Bearings: Needle Roller and Thrust Balls on Case, Ball on Motor

Lubrication: Permanent Heavy Fluid Gear Oil

Brushes: Externally Replaceable

Gear Case: Die Cast Aluminum

Gears: Hardened Steel

Seals: On Input and Output Shaft

Replacement Brushes: 6YHY5

RPM Range: 31 to 50

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
5JJ51 Grainger	Variable DC Speed Control, Output Voltage 12 VDC, Power Rating 1/25-1/3 HP, Input Voltage 12 VDC, Speed Range 30:1, Maximum Current 20.0 Amps, Chassis Mount, Acceleration/Deceleration Adjustable, Current Limit Adjustable, Minimum/Maximum Speed Adjustable, IR Compensation Adjustable, Automatic Compensation for Lowering Battery Voltage, Length 7.00 Inches, Depth 1.70 Inches, Width 3.70 Inches, Includes Speed Potentiometer, Knob and Dial Plate	DART CONTROLS 65E20-12
5JJ65 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-20E
6YHY5 Grainger	Replacement Motor Brush Set, DC, Length 5/16 In., Width 9/16 In., Includes 2 Brushes And 2 Springs	DAYTON 6YHY5
6Z392 Grainger	Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 1 Pulse per Revolution, Input Voltage 4.5 to 24 VDC, Max RPM 5000, Output Cable Length 6 Ft, 3 Wire 18 AWG, Stainless Steel Ball Bearings, Operating Temp -10 to 45 Degrees F, Molded Santoprene Rubber Housing	DART CONTROLS PU-2E

Обратите внимание:

23K108
AC Gearmotor, Single Shaft, 109 RPM, 5 HP

7AZ68
AC Gearmotor, Parallel, 220V, 24 rpm, 1/30hp

7CA10
AC Gearmotor, 115V, 12 rpm, 1/30 HP

7CJ15
AC Gearmotor, 220V, 120 rpm, 1/19 HP