ИНДУСТРИАЛЬНЫЙ КАТАЛОГ

Tensioner, Chain/Belt

Elastomeric Chain/Belt Tensioner, ANSI Chain Size 35, V Belt Size Range A, B, 3L, Mounting Hole Size M8 x 20 Metric, Idler Bolt 1/2-13 x 2 Inches, Normal 10 Degrees Force 5.6 Pounds, Normal 20 Degrees Force 14.6 Pounds, Normal 30 Degrees Force 30.4 Pounds, Hard 10 Degrees Force 7.0 Pounds, Hard 20 Degrees Force 18.2 Pounds, Hard 30 Degrees Force 37.8 Pounds, 10 Degrees Normal Dimension S 0.67 Inch, 20 Degrees Normal Dimension S 1.34 Inches, 30 Degrees Normal Dimension S 1.97 Inches

Артикул:

1L833

Каталог:

Grainger

Производитель:

LOVEJOY/ROSTA

Номер модели:

SE15

Страна производства:

USA

Вес (кг):

0.52

Спецификация:

Item: Elastomeric Tensioner

ANSI Chain Size: 35

V-Belt Size Range: A, B, 3L

Mounting Hole (In.): 5/16

Mounting Hole (Metric): M8 x 20

Idler Bolt (In.): 1/2-13 x 2

Temp. Range (F): -40 to 180

Normal 10 Deg. Force (Lb.): 5.6

Hard 10 Degree Force (Lb.): 7.0

10 Deg. Normal Dim. S (In.): 0.67

Hard 20 Degree Force (Lb.): 18.2

Normal 20 Deg. Force (Lb.): 14.6

20 Degree Dim. S (In.): 1.34

Hard 30 Degree Force (Lb.): 37.8

Normal 30 Deg. Force (Lb.): 30.4

30 Degree Dim. S (In.): 1.97

Tensioning Arm: Deflects Up to 30 Degrees Either Side of its Neutral Position Allowing a Pretension Force that Self-adjusts an Idler to Everyday Elongation of Chain or Belt while Dampening Vibration in the Drive

Insert: Four Rubber, Inside Base Isolate Tensioning Arm from Contact with Base and Provide Continuous Resistance

Function: Eliminates Slap and Vibration while Minimizing Drive, Bearing and Shaft Wear, Keep Chain and Belts Taut Preventing Uneven Drive Surges and Power Losses

Application: For Chain and Belt Tensioning, Pressing and Cushioning

Includes: Mounting Bolt and Idler Bolt, 5/8" Bushing

Dimension D (In.): 1.77

Dimension E (In.): 2.52

Dimension G (In.): 0.20

Dimension L (In.): 4.43

Dimension N (In.): 1.18

Dimension J1(In.): 3.94

Dimension J2 (In.): 3.15

Dimension K (In.): 0.98

Dimension T (In.): 0.53

Артикул Каталог	Описание	Производитель № модели
Дополнительные аксессуары:
6AGN4 Grainger	Needle Bearing Idler Sprocket, ANSI Chain Size 35, Number of Teeth 13, Outside Dia 1-3/4 In, Bore Dia 1/2 In, Length through Bore 3/4 In, Tightener Shaft Required 6AGL5, Material Steel, Teeth Material Hardened Steel, Needle Bearings, Lubrication Grease, Maintains Proper Chain Tension	POWER DRIVE HN35B13
6AGP4 Grainger	V-Belt Idler Sheave, Belt Type 4L, A, Shaft Required 6AGL5, Outside Dia 2.50 In, Hub Dia 1-9/16 In, Face Width 21/32 In, Bore Dia 1/2 In, Length through Bore 3/4 In, Construction Cast Iron, Needle Bearings, For Use With ATN1, SATN1 Tightener Shafts, 4L, 5L, A Or B Belts	POWER DRIVE NAK25
6AGP5 Grainger	V-Belt Idler Sheave, Belt Type 4L, A, Shaft Required 6AGL5, Outside Dia 3.05 In, Hub Dia 1-9/16 In, Face Width 21/32 In, Bore Dia 1/2 In, Length through Bore 3/4 In, Construction Cast Iron, Needle Bearings, For Use With ATN1, SATN1 Tightener Shafts, 4L, 5L, A Or B Belts	POWER DRIVE NAK30
6AGP6 Grainger	V-Belt Idler Sheave, Belt Type 4L, A, Shaft Required 6AGL6, Outside Dia 3.95 In, Hub Dia 2-3/16 In, Face Width 3/4 In, Bore Dia 1 In, Length through Bore 1-5/32 In, Construction Cast Iron, Needle Bearings, For Use With ATN1, SATN1 Tightener Shafts, 4L, 5L, A Or B Belts	POWER DRIVE NAK41

Обратите внимание:

1L834
Tensioner, Chain/Belt

2ZRT8
Self-Adjusting Tensioner, A V-belt Size

2ZRU1
Self-Adjusting Tensioner, 35 ANSI Chain

2ZRU3
Self-Adjusting Tensioner, 60 ANSI Chain